Macon County area

Macon County, North Carolina covers 519.6 square miles: 515.5 square miles of land and 4.081 square miles of water. Its county seat is Franklin. An estimated 39,232 people lived there in 2025.

Official Census measurements · GEOID 371132026 Gazetteer · retrieved September 27, 2026
Land area515.5 mi²
Water area4.081 mi²
Population (2025)39,232
People per mi²76

County outline

Generalized outline of Macon County, North Carolina
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Macon County is located

Macon County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.2% of Macon County’s measured area and water for 0.8%. Its combined area converts to 1,345.8 square kilometers or approximately 332,556 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land515.5371,335.235329,943.7
Water4.08110.572,611.8
Total519.6181,345.804332,555.5

How Macon County compares

By original Census land area, Macon County ranks #39 of 100 in North Carolina and #2024 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 1.12 times the North Carolina county-equivalent median of 460.3 square miles. It accounts for 1.1% of the combined county land area in the state.

See the complete North Carolina ranking · What counts as a county equivalent?

Population and density of Macon County

The Census Bureau estimates that 39,232 people lived in Macon County on July 1, 2025. That ranks #1,229 of 3,222 county equivalents nationally and #64 of 100 in North Carolina. Since the April 1, 2020 estimates base of 37,004, the population has grown by 2,228 (+6%), compared with +7.2% for North Carolina as a whole.

With 515.5 square miles of land, that is 76 people per square mile (29 per km²), placing Macon County #1,199 nationally for density and #68 in North Carolina. The median county equivalent has 47 people per square mile; the North Carolina median is 116. Put another way, there are about 8.4 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate37,08537,45737,96438,43338,82039,232
Change—+372+507+469+387+412

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Macon County

2 incorporated places lie at least partly in Macon County. Together they are home to 5,521 people (14.1%); the other 33,711 (85.9%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Franklin town, with 4,403 residents in the county. By land, Highlands town is the largest at 6.252 mi² across all its counties. Among places with at least 1,000 residents in 2020, Franklin town grew fastest since then (+5.7%).

Incorporated placePopulation 2025Since 2020Land mi²
Franklin townCounty seat4,403+5.7%4.978
Highlands townAlso in 1 other county1,118+5.7%6.252

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Macon County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Macon County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

6 ZIP Code Tabulation Areas have land in Macon County; 5 of them have most of their land inside the county, and the others mainly cover neighboring areas.

287132873428741287632877528781

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Macon County

Macon County shares a land border with 6 county equivalents, including 1 in Georgia. It has more land than 5 of them. The largest neighbor is Swain County (527.7 mi²) and the smallest is Clay County (215 mi²). Together with its neighbors, Macon County forms a block of 2,867.1 mi² of land, of which it holds 18%.

Map of Macon County and the 6 county equivalents that border it Jackson County, North Carolina: 491.1 mi² landRabun County, Georgia: 370.1 mi² landSwain County, North Carolina: 527.7 mi² landClay County, North Carolina: 215 mi² landCherokee County, North Carolina: 455.5 mi² landGraham County, North Carolina: 292 mi² land
Macon County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. MaconCompare
Swain County527.7about the sameCompare
Jackson County491.1about the sameCompare
Cherokee County455.51.1× smallerCompare
Rabun CountyGeorgia370.11.4× smallerCompare
Graham County2921.8× smallerCompare
Clay County2152.4× smallerCompare

How big is Macon County compared with U.S. states?

Macon County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 2 times as much. North Carolina’s county land could hold about 94 areas the size of Macon County.

Land area: Macon County and the closest-sized states
Macon County515.5 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 22.7 miles (36.5 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Macon County?

Macon County has more land than 1,198 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Macon County515.5 mi²
North Carolina median460.3 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Macon County at #2,105 nationally by total area, 81 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.8%, compared with a national county-equivalent median of 1.2% — 0.4 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Macon County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#2023Loudoun County, Virginia515.7Compare
#2024Macon County, North Carolina515.5This county
#2025Otsego County, Michigan515Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.152959, -83.421901. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,335,234,662 m²; AWATER: 10,570,986 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Macon County?

Macon County, North Carolina has 515.5 square miles (1,335.2 km²) of land and 4.081 square miles of water, for a total area of 519.6 square miles. It ranks #2024 of 3,222 U.S. county equivalents by land area.

Is Macon County the largest county in North Carolina?

No. Macon County ranks #39 of 100 in North Carolina by land area. The largest is Robeson County, with 947.3 square miles of land.

What counties border Macon County?

Macon County shares a land border with Jackson County, Rabun County, Georgia, Swain County, Clay County, Cherokee County, and Graham County.

What is the population of Macon County?

The Census Bureau estimates Macon County had 39,232 residents on July 1, 2025, ranking #1,229 of 3,222 county equivalents. That is 76 people per square mile of land.

What is the county seat of Macon County?

The county seat of Macon County is Franklin.

What cities and towns are in Macon County?

Macon County has 2 incorporated places. The most populous are Franklin town and Highlands town; 33,711 residents live outside any incorporated place.

Is Macon County part of a metropolitan area?

No. Macon County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Macon County?

6 ZIP Code Tabulation Areas have land in Macon County, and 5 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Macon County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 2 times as much land.

How many acres of land are in Macon County?

The land measurement converts to approximately 329,944 acres. Including water, total area is approximately 332,556 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset