Polk County area

Polk County, North Carolina covers 238.4 square miles: 237.7 square miles of land and 0.758 square miles of water. Its county seat is Columbus. An estimated 20,533 people lived there in 2025.

Official Census measurements · GEOID 371492026 Gazetteer · retrieved September 27, 2026
Land area237.7 mi²
Water area0.758 mi²
Population (2025)20,533
People per mi²86

County outline

Generalized outline of Polk County, North Carolina
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Polk County is located

Polk County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.7% of Polk County’s measured area and water for 0.3%. Its combined area converts to 617.6 square kilometers or approximately 152,605 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land237.687615.607152,119.7
Water0.7581.963485.1
Total238.445617.57152,604.8

How Polk County compares

By original Census land area, Polk County ranks #94 of 100 in North Carolina and #2933 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.516 times the North Carolina county-equivalent median of 460.3 square miles. It accounts for 0.5% of the combined county land area in the state.

See the complete North Carolina ranking · What counts as a county equivalent?

Population and density of Polk County

The Census Bureau estimates that 20,533 people lived in Polk County on July 1, 2025. That ranks #1,860 of 3,222 county equivalents nationally and #80 of 100 in North Carolina. Since the April 1, 2020 estimates base of 19,322, the population has grown by 1,211 (+6.3%), compared with +7.2% for North Carolina as a whole.

With 237.7 square miles of land, that is 86 people per square mile (33 per km²), placing Polk County #1,103 nationally for density and #64 in North Carolina. The median county equivalent has 47 people per square mile; the North Carolina median is 116. Put another way, there are about 7.4 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate19,37819,70119,99820,03220,38820,533
Change—+323+297+34+356+145

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Polk County

3 incorporated places lie at least partly in Polk County. Together they are home to 3,334 people (16.2%); the other 17,199 (83.8%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Tryon town, with 1,634 residents in the county. The county seat, Columbus town, has 1,042 residents. By land, Columbus town is the largest at 3.757 mi².

Incorporated placePopulation 2025Since 2020Land mi²
Tryon town1,634+5.7%2.008
Columbus townCounty seat1,042+5.5%3.757
Saluda cityAlso in 1 other county658+6.6%1.561

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Polk County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Polk County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

7 ZIP Code Tabulation Areas have land in Polk County; 4 of them have most of their land inside the county, and the others mainly cover neighboring areas.

28139287222873128756287732878228792

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Polk County

Polk County shares a land border with 4 county equivalents, including 2 in South Carolina. Each of them has more land than Polk County. The largest neighbor is Spartanburg County (808.4 mi²) and the smallest is Henderson County (373 mi²). Together with its neighbors, Polk County forms a block of 2,770.4 mi² of land, of which it holds 8.6%.

Map of Polk County and the 4 county equivalents that border it Rutherford County, North Carolina: 565.4 mi² landHenderson County, North Carolina: 373 mi² landSpartanburg County, South Carolina: 808.4 mi² landGreenville County, South Carolina: 785.9 mi² land
Polk County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. PolkCompare
Spartanburg CountySouth Carolina808.43.4× largerCompare
Greenville CountySouth Carolina785.93.3× largerCompare
Rutherford County565.42.4× largerCompare
Henderson County3731.6× largerCompare

How big is Polk County compared with U.S. states?

Polk County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 4.3 times as much. North Carolina’s county land could hold about 205 areas the size of Polk County.

Land area: Polk County and the closest-sized states
Polk County237.7 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 15.4 miles (24.8 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Polk County?

Polk County has more land than 289 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Polk County237.7 mi²
North Carolina median460.3 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Polk County at #2,967 nationally by total area, 34 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.3%, compared with a national county-equivalent median of 1.2% — 0.9 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Polk County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#2932St. James Parish, Louisiana237.9Compare
#2933Polk County, North Carolina237.7This county
#2934Seminole County, Georgia237.6Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.277901, -82.167621. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 615,606,313 m²; AWATER: 1,964,035 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Polk County?

Polk County, North Carolina has 237.7 square miles (615.6 km²) of land and 0.758 square miles of water, for a total area of 238.4 square miles. It ranks #2933 of 3,222 U.S. county equivalents by land area.

Is Polk County the largest county in North Carolina?

No. Polk County ranks #94 of 100 in North Carolina by land area. The largest is Robeson County, with 947.3 square miles of land.

What counties border Polk County?

Polk County shares a land border with Rutherford County, Henderson County, Spartanburg County, South Carolina, and Greenville County, South Carolina.

What is the population of Polk County?

The Census Bureau estimates Polk County had 20,533 residents on July 1, 2025, ranking #1,860 of 3,222 county equivalents. That is 86 people per square mile of land.

What is the county seat of Polk County?

The county seat of Polk County is Columbus.

What cities and towns are in Polk County?

Polk County has 3 incorporated places. The most populous are Tryon town, Columbus town, and Saluda city; 17,199 residents live outside any incorporated place.

Is Polk County part of a metropolitan area?

No. Polk County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Polk County?

7 ZIP Code Tabulation Areas have land in Polk County, and 4 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Polk County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 4.3 times as much land.

How many acres of land are in Polk County?

The land measurement converts to approximately 152,120 acres. Including water, total area is approximately 152,605 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset