Ransom County area

Ransom County, North Dakota covers 863.9 square miles: 862.5 square miles of land and 1.383 square miles of water. Its county seat is Lisbon. An estimated 5,617 people lived there in 2025.

Official Census measurements · GEOID 380732026 Gazetteer · retrieved September 27, 2026
Land area862.5 mi²
Water area1.383 mi²
Population (2025)5,617
People per mi²6.5

County outline

Generalized outline of Ransom County, North Dakota
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Ransom County is located

Ransom County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.8% of Ransom County’s measured area and water for 0.2%. Its combined area converts to 2,237.4 square kilometers or approximately 552,867 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land862.4722,233.792551,982.1
Water1.3833.582885.1
Total863.8552,237.374552,867.2

How Ransom County compares

By original Census land area, Ransom County ranks #46 of 53 in North Dakota and #959 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.742 times the North Dakota county-equivalent median of 1,161.8 square miles. It accounts for 1.3% of the combined county land area in the state.

See the complete North Dakota ranking · What counts as a county equivalent?

Population and density of Ransom County

The Census Bureau estimates that 5,617 people lived in Ransom County on July 1, 2025. That ranks #2,842 of 3,222 county equivalents nationally and #22 of 53 in North Dakota. Since the April 1, 2020 estimates base of 5,708, the population has declined by 91 (−1.6%), compared with +2.6% for North Dakota as a whole.

With 862.5 square miles of land, that is 6.5 people per square mile (2.5 per km²), placing Ransom County #2,781 nationally for density and #16 in North Dakota. The median county equivalent has 47 people per square mile; the North Dakota median is 3.7. Put another way, there are about 98 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate5,7005,6835,6535,6295,6365,617
Change—−17−30−24+7−19

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Ransom County

5 incorporated places lie at least partly in Ransom County. Together they are home to 3,249 people (57.8%); the other 2,368 (42.2%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Lisbon city, with 2,184 residents in the county.

Incorporated placePopulation 2025Since 2020Land mi²
Lisbon cityCounty seat2,184−1%2.293
Enderlin cityAlso in 1 other county854−2.6%1.631
Fort Ransom city95+4.4%0.308
Sheldon city94−2.1%0.409
Elliott city220%0.153

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Ransom County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Ransom County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

11 ZIP Code Tabulation Areas have land in Ransom County; 3 of them have most of their land inside the county, and the others mainly cover neighboring areas.

5802758033580495805258054580575806058062580685806958490

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Ransom County

Ransom County shares a land border with 6 county equivalents. It has more land than 1 of them. The largest neighbor is Cass County (1,764.9 mi²) and the smallest is Sargent County (858.5 mi²). Together with its neighbors, Ransom County forms a block of 8,690.6 mi² of land, of which it holds 9.9%.

Map of Ransom County and the 6 county equivalents that border it Sargent County, North Dakota: 858.5 mi² landLaMoure County, North Dakota: 1,146 mi² landRichland County, North Dakota: 1,435.7 mi² landCass County, North Dakota: 1,764.9 mi² landBarnes County, North Dakota: 1,491.6 mi² landDickey County, North Dakota: 1,131.5 mi² land
Ransom County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. RansomCompare
Cass County1,764.92× largerCompare
Barnes County1,491.61.7× largerCompare
Richland County1,435.71.7× largerCompare
LaMoure County1,1461.3× largerCompare
Dickey County1,131.51.3× largerCompare
Sargent County858.5about the sameCompare

How big is Ransom County compared with U.S. states?

Ransom County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.2 times as much. North Dakota’s county land could hold about 80 areas the size of Ransom County.

Land area: Ransom County and the closest-sized states
Ransom County862.5 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 29.4 miles (47.3 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Ransom County?

Ransom County has more land than 2,263 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Ransom County862.5 mi²
North Dakota median1,161.8 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Ransom County at #1,058 nationally by total area, 99 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.2%, compared with a national county-equivalent median of 1.2% — 1 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Ransom County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#958Plymouth County, Iowa862.8Compare
#959Ransom County, North Dakota862.5This county
#960Fort Bend County, Texas862.1Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 46.449276, -97.647554. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,233,792,812 m²; AWATER: 3,582,339 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Ransom County?

Ransom County, North Dakota has 862.5 square miles (2,233.8 km²) of land and 1.383 square miles of water, for a total area of 863.9 square miles. It ranks #959 of 3,222 U.S. county equivalents by land area.

Is Ransom County the largest county in North Dakota?

No. Ransom County ranks #46 of 53 in North Dakota by land area. The largest is McKenzie County, with 2,760.1 square miles of land.

What counties border Ransom County?

Ransom County shares a land border with Sargent County, LaMoure County, Richland County, Cass County, Barnes County, and Dickey County.

What is the population of Ransom County?

The Census Bureau estimates Ransom County had 5,617 residents on July 1, 2025, ranking #2,842 of 3,222 county equivalents. That is 6.5 people per square mile of land.

What is the county seat of Ransom County?

The county seat of Ransom County is Lisbon.

What cities and towns are in Ransom County?

Ransom County has 5 incorporated places. The most populous are Lisbon city, Enderlin city, Fort Ransom city, Sheldon city, and Elliott city; 2,368 residents live outside any incorporated place.

Is Ransom County part of a metropolitan area?

No. Ransom County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Ransom County?

11 ZIP Code Tabulation Areas have land in Ransom County, and 3 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Ransom County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.2 times as much land.

How many acres of land are in Ransom County?

The land measurement converts to approximately 551,982 acres. Including water, total area is approximately 552,867 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset