Montague County area

Montague County, Texas covers 938.3 square miles: 930.9 square miles of land and 7.37 square miles of water. Its county seat is Montague. An estimated 21,966 people lived there in 2025.

Official Census measurements · GEOID 483372026 Gazetteer · retrieved September 27, 2026
Land area930.9 mi²
Water area7.37 mi²
Population (2025)21,966
People per mi²24

County outline

Generalized outline of Montague County, Texas
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Montague County is located

Montague County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.2% of Montague County’s measured area and water for 0.8%. Its combined area converts to 2,430.1 square kilometers or approximately 600,497 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land930.9062,411.035595,779.8
Water7.3719.0884,716.8
Total938.2762,430.124600,496.6

How Montague County compares

By original Census land area, Montague County ranks #97 of 254 in Texas and #772 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 1.024 times the Texas county-equivalent median of 908.7 square miles. It accounts for 0.4% of the combined county land area in the state.

See the complete Texas ranking · What counts as a county equivalent?

Population and density of Montague County

The Census Bureau estimates that 21,966 people lived in Montague County on July 1, 2025. That ranks #1,775 of 3,222 county equivalents nationally and #112 of 254 in Texas. Since the April 1, 2020 estimates base of 20,011, the population has grown by 1,955 (+9.8%), compared with +8.8% for Texas as a whole.

With 930.9 square miles of land, that is 24 people per square mile (9.1 per km²), placing Montague County #2,183 nationally for density and #122 in Texas. The median county equivalent has 47 people per square mile; the Texas median is 22. Put another way, there are about 27 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate20,04020,47121,10621,64921,86321,966
Change—+431+635+543+214+103

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Montague County

3 incorporated places lie at least partly in Montague County. Together they are home to 10,346 people (47.1%); the other 11,620 (52.9%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Bowie city, with 6,113 residents in the county. Among places with at least 1,000 residents in 2020, Bowie city grew fastest since then (+12.3%).

Incorporated placePopulation 2025Since 2020Land mi²
Bowie city6,113+12.3%5.515
Nocona city3,277+7.3%2.815
Saint Jo city956+7.9%1.167

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Montague County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Montague County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

10 ZIP Code Tabulation Areas have land in Montague County; 7 of them have most of their land inside the county, and the others mainly cover neighboring areas.

76225762287623076239762517625276255762617626576270

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Montague County

Montague County shares a land border with 6 county equivalents, including 2 in Oklahoma. It has more land than 5 of them. The largest neighbor is Clay County (1,088.8 mi²) and the smallest is Love County (513.9 mi²). Together with its neighbors, Montague County forms a block of 5,982.7 mi² of land, of which it holds 15.6%.

Map of Montague County and the 6 county equivalents that border it Cooke County, Texas: 874.8 mi² landJefferson County, Oklahoma: 759 mi² landClay County, Texas: 1,088.8 mi² landWise County, Texas: 904.4 mi² landLove County, Oklahoma: 513.9 mi² landJack County, Texas: 911 mi² land
Montague County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. MontagueCompare
Clay County1,088.81.2× largerCompare
Jack County911about the sameCompare
Wise County904.4about the sameCompare
Cooke County874.81.1× smallerCompare
Jefferson CountyOklahoma7591.2× smallerCompare
Love CountyOklahoma513.91.8× smallerCompare

How big is Montague County compared with U.S. states?

Montague County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.1 times as much. Texas’s county land could hold about 281 areas the size of Montague County.

Land area: Montague County and the closest-sized states
Montague County930.9 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 30.5 miles (49.1 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Montague County?

Montague County has more land than 2,450 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Montague County930.9 mi²
Texas median908.7 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Montague County at #866 nationally by total area, 94 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.8%, compared with a national county-equivalent median of 1.2% — 0.4 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Montague County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#771Carroll County, New Hampshire931.9Compare
#772Montague County, Texas930.9This county
#773Rutland County, Vermont930.6Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 33.678356, -97.725014. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,411,034,620 m²; AWATER: 19,087,358 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Montague County?

Montague County, Texas has 930.9 square miles (2,411 km²) of land and 7.37 square miles of water, for a total area of 938.3 square miles. It ranks #772 of 3,222 U.S. county equivalents by land area.

Is Montague County the largest county in Texas?

No. Montague County ranks #97 of 254 in Texas by land area. The largest is Brewster County, with 6,183.8 square miles of land.

What counties border Montague County?

Montague County shares a land border with Cooke County, Jefferson County, Oklahoma, Clay County, Wise County, Love County, Oklahoma, and Jack County.

What is the population of Montague County?

The Census Bureau estimates Montague County had 21,966 residents on July 1, 2025, ranking #1,775 of 3,222 county equivalents. That is 24 people per square mile of land.

What is the county seat of Montague County?

The county seat of Montague County is Montague.

What cities and towns are in Montague County?

Montague County has 3 incorporated places. The most populous are Bowie city, Nocona city, and Saint Jo city; 11,620 residents live outside any incorporated place.

Is Montague County part of a metropolitan area?

No. Montague County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Montague County?

10 ZIP Code Tabulation Areas have land in Montague County, and 7 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Montague County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.1 times as much land.

How many acres of land are in Montague County?

The land measurement converts to approximately 595,780 acres. Including water, total area is approximately 600,497 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset