Lipscomb County area

Lipscomb County, Texas covers 932.3 square miles: 932.2 square miles of land and 0.115 square miles of water. Its county seat is Lipscomb. An estimated 2,955 people lived there in 2025.

Official Census measurements · GEOID 482952026 Gazetteer · retrieved September 27, 2026
Land area932.2 mi²
Water area0.115 mi²
Population (2025)2,955
People per mi²3.2

County outline

Generalized outline of Lipscomb County, Texas
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Lipscomb County is located

Lipscomb County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 100% of Lipscomb County’s measured area and water for 0%. Its combined area converts to 2,414.7 square kilometers or approximately 596,691 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land932.2142,414.423596,617
Water0.1150.29873.6
Total932.3292,414.721596,690.6

How Lipscomb County compares

By original Census land area, Lipscomb County ranks #96 of 254 in Texas and #770 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 1.026 times the Texas county-equivalent median of 908.7 square miles. It accounts for 0.4% of the combined county land area in the state.

See the complete Texas ranking · What counts as a county equivalent?

Population and density of Lipscomb County

The Census Bureau estimates that 2,955 people lived in Lipscomb County on July 1, 2025. That ranks #3,037 of 3,222 county equivalents nationally and #223 of 254 in Texas. Since the April 1, 2020 estimates base of 3,061, the population has declined by 106 (−3.5%), compared with +8.8% for Texas as a whole.

With 932.2 square miles of land, that is 3.2 people per square mile (1.2 per km²), placing Lipscomb County #2,966 nationally for density and #217 in Texas. The median county equivalent has 47 people per square mile; the Texas median is 22. Put another way, there are about 202 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate3,0392,9022,8562,9162,9012,955
Change—−137−46+60−15+54

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Lipscomb County

4 incorporated places lie at least partly in Lipscomb County. Together they are home to 2,378 people (80.5%); the other 577 (19.5%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Booker town, with 1,361 residents in the county (the city extends into 1 other county). By land, Higgins city is the largest at 1.109 mi².

Incorporated placePopulation 2025Since 2020Land mi²
Booker townAlso in 1 other county1,361−3.7%1.053
Follett city361−4.5%0.971
Higgins city353−2.5%1.109
Darrouzett town303−4.4%0.508

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Lipscomb County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Lipscomb County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

7 ZIP Code Tabulation Areas have land in Lipscomb County; 5 of them have most of their land inside the county, and the others mainly cover neighboring areas.

79005790147902479034790467905679070

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Lipscomb County

Lipscomb County shares a land border with 5 county equivalents, including 2 in Oklahoma. It has more land than 3 of them. The largest neighbor is Beaver County (1,814.8 mi²) and the smallest is Hemphill County (906.3 mi²). Together with its neighbors, Lipscomb County forms a block of 6,726.6 mi² of land, of which it holds 13.9%.

Map of Lipscomb County and the 5 county equivalents that border it Ochiltree County, Texas: 917.7 mi² landEllis County, Oklahoma: 1,231.5 mi² landBeaver County, Oklahoma: 1,814.8 mi² landHemphill County, Texas: 906.3 mi² landRoberts County, Texas: 924.1 mi² land
Lipscomb County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. LipscombCompare
Beaver CountyOklahoma1,814.81.9× largerCompare
Ellis CountyOklahoma1,231.51.3× largerCompare
Roberts County924.1about the sameCompare
Ochiltree County917.7about the sameCompare
Hemphill County906.3about the sameCompare

How big is Lipscomb County compared with U.S. states?

Lipscomb County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.1 times as much. Texas’s county land could hold about 280 areas the size of Lipscomb County.

Land area: Lipscomb County and the closest-sized states
Lipscomb County932.2 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 30.5 miles (49.1 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Lipscomb County?

Lipscomb County has more land than 2,452 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Lipscomb County932.2 mi²
Texas median908.7 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Lipscomb County at #876 nationally by total area, 106 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0%, compared with a national county-equivalent median of 1.2% — 1.2 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Lipscomb County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#769Grayson County, Texas932.8Compare
#770Lipscomb County, Texas932.2This county
#771Carroll County, New Hampshire931.9Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 36.280200, -100.272683. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,414,422,636 m²; AWATER: 298,741 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Lipscomb County?

Lipscomb County, Texas has 932.2 square miles (2,414.4 km²) of land and 0.115 square miles of water, for a total area of 932.3 square miles. It ranks #770 of 3,222 U.S. county equivalents by land area.

Is Lipscomb County the largest county in Texas?

No. Lipscomb County ranks #96 of 254 in Texas by land area. The largest is Brewster County, with 6,183.8 square miles of land.

What counties border Lipscomb County?

Lipscomb County shares a land border with Ochiltree County, Ellis County, Oklahoma, Beaver County, Oklahoma, Hemphill County, and Roberts County.

What is the population of Lipscomb County?

The Census Bureau estimates Lipscomb County had 2,955 residents on July 1, 2025, ranking #3,037 of 3,222 county equivalents. That is 3.2 people per square mile of land.

What is the county seat of Lipscomb County?

The county seat of Lipscomb County is Lipscomb.

What cities and towns are in Lipscomb County?

Lipscomb County has 4 incorporated places. The most populous are Booker town, Follett city, Higgins city, and Darrouzett town; 577 residents live outside any incorporated place.

Is Lipscomb County part of a metropolitan area?

No. Lipscomb County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Lipscomb County?

7 ZIP Code Tabulation Areas have land in Lipscomb County, and 5 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Lipscomb County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.1 times as much land.

How many acres of land are in Lipscomb County?

The land measurement converts to approximately 596,617 acres. Including water, total area is approximately 596,691 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset