County outline
Where Stephens County is located
Area breakdown
Land accounts for 97.3% of Stephens County’s measured area and water for 2.7%. Its combined area converts to 2,386.6 square kilometers or approximately 589,753 acres.
Green: land · blue: water
| Measurement | Square miles | Square kilometers | Acres |
|---|---|---|---|
| Land | 896.721 | 2,322.497 | 573,901.4 |
| Water | 24.768 | 64.149 | 15,851.5 |
| Total | 921.489 | 2,386.646 | 589,753 |
How Stephens County compares
By original Census land area, Stephens County ranks #154 of 254 in Texas and #870 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.
Its land area is 0.987 times the Texas county-equivalent median of 908.7 square miles. It accounts for 0.3% of the combined county land area in the state.
See the complete Texas ranking · What counts as a county equivalent?
Population and density of Stephens County
The Census Bureau estimates that 9,380 people lived in Stephens County on July 1, 2025. That ranks #2,531 of 3,222 county equivalents nationally and #170 of 254 in Texas. Since the April 1, 2020 estimates base of 9,100, the population has grown by 280 (+3.1%), compared with +8.8% for Texas as a whole.
With 896.7 square miles of land, that is 10 people per square mile (4 per km²), placing Stephens County #2,629 nationally for density and #166 in Texas. The median county equivalent has 47 people per square mile; the Texas median is 22. Put another way, there are about 61 acres of land per resident.
| July 1 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|
| Estimate | 9,095 | 9,437 | 9,368 | 9,386 | 9,414 | 9,380 |
| Change | — | +342 | −69 | +18 | +28 | −34 |
U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.
Cities and towns in Stephens County
1 incorporated place lies at least partly in Stephens County. Together they are home to 5,123 people (54.6%); the other 4,257 (45.4%) live outside any incorporated place, in unincorporated communities and rural areas.
The largest is Breckenridge city, with 5,123 residents in the county.
Metropolitan area
Stephens County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.
ZIP codes
8 ZIP Code Tabulation Areas have land in Stephens County; 2 of them have most of their land inside the county, and the others mainly cover neighboring areas.
7642476429764377645076464764707647576491
ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.
Counties bordering Stephens County
Stephens County shares a land border with 5 county equivalents. Each of them has more land than Stephens County. The largest neighbor is Palo Pinto County (952.5 mi²) and the smallest is Throckmorton County (912.6 mi²). Together with its neighbors, Stephens County forms a block of 5,517.1 mi² of land, of which it holds 16.3%.
| Bordering county equivalent | Land mi² | Size vs. Stephens | Compare |
|---|---|---|---|
| Palo Pinto County | 952.5 | 1.1× larger | Compare |
| Eastland County | 926.5 | about the same | Compare |
| Young County | 914.5 | about the same | Compare |
| Shackelford County | 914.3 | about the same | Compare |
| Throckmorton County | 912.6 | about the same | Compare |
How big is Stephens County compared with U.S. states?
Stephens County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.2 times as much. Texas’s county land could hold about 291 areas the size of Stephens County.
Another way to picture it: the same land area would fill a square about 29.9 miles (48.2 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.
State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.
What stands out about Stephens County?
Stephens County has more land than 2,352 of the other 3,221 county equivalents in the dataset.
A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.
Does including water change its rank?
Using land plus water places Stephens County at #898 nationally by total area, 28 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.
Its water share is 2.7%, compared with a national county-equivalent median of 1.2% — 1.5 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.
Closest positions in the national land ranking
These entries sit immediately beside Stephens County in the national ranking. They can be in different states and are not necessarily geographic neighbors.
| Land rank | County equivalent | Land mi² | Comparison |
|---|---|---|---|
| #869 | Borden County, Texas | 897.4 | Compare |
| #870 | Stephens County, Texas | 896.7 | This county |
| #871 | Canadian County, Oklahoma | 896.6 | Compare |
Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.
Representative coordinates
The Census internal point is 32.738052, -98.839344. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.
Source and precision
U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,322,497,190 m²; AWATER: 64,147,706 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.
Common questions
How big is Stephens County?
Stephens County, Texas has 896.7 square miles (2,322.5 km²) of land and 24.8 square miles of water, for a total area of 921.5 square miles. It ranks #870 of 3,222 U.S. county equivalents by land area.
Is Stephens County the largest county in Texas?
No. Stephens County ranks #154 of 254 in Texas by land area. The largest is Brewster County, with 6,183.8 square miles of land.
What counties border Stephens County?
Stephens County shares a land border with Palo Pinto County, Shackelford County, Eastland County, Young County, and Throckmorton County.
What is the population of Stephens County?
The Census Bureau estimates Stephens County had 9,380 residents on July 1, 2025, ranking #2,531 of 3,222 county equivalents. That is 10 people per square mile of land.
What is the county seat of Stephens County?
The county seat of Stephens County is Breckenridge.
Is Stephens County part of a metropolitan area?
No. Stephens County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.
How many ZIP codes are in Stephens County?
8 ZIP Code Tabulation Areas have land in Stephens County, and 2 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.
How does Stephens County compare with U.S. states?
It has less land than every state. Rhode Island, the smallest, has 1.2 times as much land.
How many acres of land are in Stephens County?
The land measurement converts to approximately 573,901 acres. Including water, total area is approximately 589,753 acres. One square mile equals 640 acres.
Why might another source show a different area?
Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.
Can this establish a property boundary?
No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.