Pacific County area

Pacific County, Washington covers 1,226.5 square miles: 933.4 square miles of land and 293.2 square miles of water. Its county seat is South Bend. An estimated 24,357 people lived there in 2025.

Official Census measurements · GEOID 530492026 Gazetteer · retrieved September 27, 2026
Land area933.4 mi²
Water area293.2 mi²
Population (2025)24,357
People per mi²26

County outline

Generalized outline of Pacific County, Washington
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Pacific County is located

Pacific County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 76.1% of Pacific County’s measured area and water for 23.9%. Its combined area converts to 3,176.7 square kilometers or approximately 784,984 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land933.3742,417.428597,359.4
Water293.164759.291187,625
Total1,226.5383,176.719784,984.3

How Pacific County compares

By original Census land area, Pacific County ranks #30 of 39 in Washington and #767 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.537 times the Washington county-equivalent median of 1,738.8 square miles. It accounts for 1.4% of the combined county land area in the state.

See the complete Washington ranking · What counts as a county equivalent?

Population and density of Pacific County

The Census Bureau estimates that 24,357 people lived in Pacific County on July 1, 2025. That ranks #1,690 of 3,222 county equivalents nationally and #28 of 39 in Washington. Since the April 1, 2020 estimates base of 23,369, the population has grown by 988 (+4.2%), compared with +3.8% for Washington as a whole.

With 933.4 square miles of land, that is 26 people per square mile (10 per km²), placing Pacific County #2,115 nationally for density and #24 in Washington. The median county equivalent has 47 people per square mile; the Washington median is 39. Put another way, there are about 25 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate23,50324,02824,09124,19724,23724,357
Change—+525+63+106+40+120

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Pacific County

4 incorporated places lie at least partly in Pacific County. Together they are home to 7,906 people (32.5%); the other 16,451 (67.5%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Raymond city, with 3,235 residents in the county. The county seat, South Bend city, has 1,790 residents. Among places with at least 1,000 residents in 2020, Raymond city grew fastest since then (+4.8%).

Incorporated placePopulation 2025Since 2020Land mi²
Raymond city3,235+4.8%4.106
South Bend cityCounty seat1,790+2.7%1.641
Long Beach city1,769+4.4%1.379
Ilwaco city1,112+2.3%2.05

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Pacific County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Pacific County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

14 ZIP Code Tabulation Areas have land in Pacific County; 13 of them have most of their land inside the county, and the others mainly cover neighboring areas.

9852798537985479857798586985909861498621986249863198638986409864198644

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Pacific County

Pacific County shares a land border with 3 county equivalents. It has more land than 1 of them. The largest neighbor is Lewis County (2,402.8 mi²) and the smallest is Wahkiakum County (262.9 mi²). Together with its neighbors, Pacific County forms a block of 5,501.4 mi² of land, of which it holds 17%.

Map of Pacific County and the 3 county equivalents that border it Grays Harbor County, Washington: 1,902.3 mi² landLewis County, Washington: 2,402.8 mi² landWahkiakum County, Washington: 262.9 mi² land
Pacific County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. PacificCompare
Lewis County2,402.82.6× largerCompare
Grays Harbor County1,902.32× largerCompare
Wahkiakum County262.93.5× smallerCompare

How big is Pacific County compared with U.S. states?

Pacific County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.1 times as much. Washington’s county land could hold about 71 areas the size of Pacific County.

Land area: Pacific County and the closest-sized states
Pacific County933.4 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 30.6 miles (49.2 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Pacific County?

Pacific County has more land than 2,455 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Pacific County933.4 mi²
Washington median1,738.8 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Pacific County at #578 nationally by total area, 189 places closer to the top than its land rank. The water assigned to this geography moves it ahead of some county equivalents with more land.

Its water share is 23.9%, compared with a national county-equivalent median of 1.2% — 22.7 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Pacific County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#766Newton County, Texas933.7Compare
#767Pacific County, Washington933.4This county
#768Merrimack County, New Hampshire932.9Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 46.556587, -123.782419. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,417,427,225 m²; AWATER: 759,290,643 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Pacific County?

Pacific County, Washington has 933.4 square miles (2,417.4 km²) of land and 293.2 square miles of water, for a total area of 1,226.5 square miles. It ranks #767 of 3,222 U.S. county equivalents by land area.

Is Pacific County the largest county in Washington?

No. Pacific County ranks #30 of 39 in Washington by land area. The largest is Okanogan County, with 5,266.2 square miles of land.

What counties border Pacific County?

Pacific County shares a land border with Grays Harbor County, Lewis County, and Wahkiakum County.

What is the population of Pacific County?

The Census Bureau estimates Pacific County had 24,357 residents on July 1, 2025, ranking #1,690 of 3,222 county equivalents. That is 26 people per square mile of land.

What is the county seat of Pacific County?

The county seat of Pacific County is South Bend.

What cities and towns are in Pacific County?

Pacific County has 4 incorporated places. The most populous are Raymond city, South Bend city, Long Beach city, and Ilwaco city; 16,451 residents live outside any incorporated place.

Is Pacific County part of a metropolitan area?

No. Pacific County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Pacific County?

14 ZIP Code Tabulation Areas have land in Pacific County, and 13 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Pacific County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.1 times as much land.

How many acres of land are in Pacific County?

The land measurement converts to approximately 597,359 acres. Including water, total area is approximately 784,984 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset