County outline
Where Rice County is located
Area breakdown
Land accounts for 96.1% of Rice County’s measured area and water for 3.9%. Its combined area converts to 1,336.2 square kilometers or approximately 330,178 acres.
Green: land · blue: water
| Measurement | Square miles | Square kilometers | Acres |
|---|---|---|---|
| Land | 495.799 | 1,284.114 | 317,311.4 |
| Water | 20.104 | 52.069 | 12,866.6 |
| Total | 515.903 | 1,336.183 | 330,177.9 |
How Rice County compares
By original Census land area, Rice County ranks #68 of 87 in Minnesota and #2099 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.
Its land area is 0.735 times the Minnesota county-equivalent median of 674.6 square miles. It accounts for 0.6% of the combined county land area in the state.
See the complete Minnesota ranking · What counts as a county equivalent?
Population and density of Rice County
The Census Bureau estimates that 69,939 people lived in Rice County on July 1, 2025. That ranks #805 of 3,222 county equivalents nationally and #14 of 87 in Minnesota. Since the April 1, 2020 estimates base of 67,093, the population has grown by 2,846 (+4.2%), compared with +2.2% for Minnesota as a whole.
With 495.8 square miles of land, that is 141 people per square mile (54 per km²), placing Rice County #806 nationally for density and #12 in Minnesota. The median county equivalent has 47 people per square mile; the Minnesota median is 27. Put another way, there are about 4.5 acres of land per resident.
| July 1 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|
| Estimate | 67,105 | 67,359 | 67,991 | 68,585 | 69,545 | 69,939 |
| Change | — | +254 | +632 | +594 | +960 | +394 |
U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.
Cities and towns in Rice County
Rice County is divided into 21 municipalities and townships. In Minnesota, county subdivisions are local governments, and together they cover all of the county’s land and residents.
The most populous is Faribault city, with 25,040 residents (35.8% of the county). The largest by land is Northfield township, at 38.7 mi², or 7.8% of the county’s land. Among those with at least 1,000 residents in 2020, Lonsdale city grew fastest since then (+9.2%).
| County subdivision | Population 2025 | Since 2020 | Land mi² | Share of county land |
|---|---|---|---|---|
| Faribault cityCounty seat | 25,040 | +2.3% | 15.8 | 3.2% |
| Northfield city | 20,744 | +6.1% | 7.086 | 1.4% |
| Lonsdale city | 5,117 | +9.2% | 2.611 | 0.5% |
| Webster township | 1,839 | +3.4% | 35.1 | 7.1% |
| Bridgewater township | 1,836 | +1.8% | 35.9 | 7.2% |
| Dundas city | 1,833 | +7.2% | 1.849 | 0.4% |
| Wells township | 1,585 | +3.6% | 25.6 | 5.2% |
| Forest township | 1,377 | +3.6% | 32.2 | 6.5% |
| Warsaw township | 1,317 | +3.4% | 32.3 | 6.5% |
| Wheatland township | 1,307 | +3.2% | 32.5 | 6.6% |
| Cannon City township | 1,273 | +3.4% | 30.4 | 6.1% |
| Shieldsville township | 1,101 | +4% | 32.2 | 6.5% |
| Morristown city | 1,023 | +3% | 1.124 | 0.2% |
| Walcott township | 969 | +3.6% | 32.9 | 6.6% |
| Northfield township | 892 | +3.2% | 38.7 | 7.8% |
Show the other 6 subdivisions
| Name | Population 2025 | Since 2020 | Land mi² |
|---|---|---|---|
| Erin township | 867 | +3.6% | 34.6 |
| Morristown township | 608 | +3.2% | 32.8 |
| Wheeling township | 536 | +3.3% | 34.6 |
| Richland township | 388 | +3.2% | 36.1 |
| Nerstrand city | 274 | −0.4% | 1.413 |
| Dennison city | 13 | 0% | 0.036 |
Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each subdivision inside Rice County. Land: 2026 Census Gazetteer. How communities are listed.
Metropolitan area
Rice County is a central county of the Faribault-Northfield, MN Micropolitan Statistical Area. Rice County is the area’s only county equivalent, so the micro area has the same 495.8 square miles of land. By combined land it ranks #436 of 542 micropolitan areas, and #113 by population. It belongs to the Minneapolis-St. Paul, MN-WI Combined Statistical Area.
ZIP codes
16 ZIP Code Tabulation Areas have land in Rice County; 8 of them have most of their land inside the county, and the others mainly cover neighboring areas.
55018550195502155046550495505255053550575508755088559465605256069560715609356096
ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.
Counties bordering Rice County
Rice County shares a land border with 6 county equivalents. It has more land than 4 of them. The largest neighbor is Goodhue County (756.7 mi²) and the smallest is Scott County (356.1 mi²). Together with its neighbors, Rice County forms a block of 3,472.9 mi² of land, of which it holds 14.3%.
| Bordering county equivalent | Land mi² | Size vs. Rice | Compare |
|---|---|---|---|
| Goodhue County | 756.7 | 1.5× larger | Compare |
| Dakota County | 562.6 | 1.1× larger | Compare |
| Le Sueur County | 448.8 | 1.1× smaller | Compare |
| Steele County | 429.6 | 1.2× smaller | Compare |
| Waseca County | 423.4 | 1.2× smaller | Compare |
| Scott County | 356.1 | 1.4× smaller | Compare |
How big is Rice County compared with U.S. states?
Rice County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 2.1 times as much. Minnesota’s county land could hold about 161 areas the size of Rice County.
Another way to picture it: the same land area would fill a square about 22.3 miles (35.8 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.
State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.
What stands out about Rice County?
Rice County has more land than 1,123 of the other 3,221 county equivalents in the dataset.
A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.
Does including water change its rank?
Using land plus water places Rice County at #2,121 nationally by total area, 22 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.
Its water share is 3.9%, compared with a national county-equivalent median of 1.2% — 2.7 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.
Closest positions in the national land ranking
These entries sit immediately beside Rice County in the national ranking. They can be in different states and are not necessarily geographic neighbors.
| Land rank | County equivalent | Land mi² | Comparison |
|---|---|---|---|
| #2098 | Dodge County, Georgia | 496 | Compare |
| #2099 | Rice County, Minnesota | 495.8 | This county |
| #2100 | Fulton County, New York | 495.5 | Compare |
Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.
Representative coordinates
The Census internal point is 44.351892, -93.298435. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.
Source and precision
U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,284,114,072 m²; AWATER: 52,069,006 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.
Common questions
How big is Rice County?
Rice County, Minnesota has 495.8 square miles (1,284.1 km²) of land and 20.1 square miles of water, for a total area of 515.9 square miles. It ranks #2099 of 3,222 U.S. county equivalents by land area.
Is Rice County the largest county in Minnesota?
No. Rice County ranks #68 of 87 in Minnesota by land area. The largest is St. Louis County, with 6,248.1 square miles of land.
What counties border Rice County?
Rice County shares a land border with Le Sueur County, Goodhue County, Steele County, Dakota County, Scott County, and Waseca County.
What is the population of Rice County?
The Census Bureau estimates Rice County had 69,939 residents on July 1, 2025, ranking #805 of 3,222 county equivalents. That is 141 people per square mile of land.
What is the county seat of Rice County?
The county seat of Rice County is Faribault.
What cities and towns are in Rice County?
Rice County has 21 county subdivisions (cities, towns and townships). The most populous five are Faribault city, Northfield city, Lonsdale city, Webster township, and Bridgewater township.
Is Rice County part of a metropolitan area?
Yes. It is a central county of the Faribault-Northfield, MN Micropolitan Statistical Area.
How many ZIP codes are in Rice County?
16 ZIP Code Tabulation Areas have land in Rice County, and 8 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.
How does Rice County compare with U.S. states?
It has less land than every state. Rhode Island, the smallest, has 2.1 times as much land.
How many acres of land are in Rice County?
The land measurement converts to approximately 317,311 acres. Including water, total area is approximately 330,178 acres. One square mile equals 640 acres.
Why might another source show a different area?
Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.
Can this establish a property boundary?
No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.