Madison County area

Madison County, North Carolina covers 451.5 square miles: 449.6 square miles of land and 1.866 square miles of water. Its county seat is Marshall. An estimated 22,553 people lived there in 2025.

Official Census measurements · GEOID 371152026 Gazetteer · retrieved September 27, 2026
Land area449.6 mi²
Water area1.866 mi²
Population (2025)22,553
People per mi²50

County outline

Generalized outline of Madison County, North Carolina
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Madison County is located

Madison County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.6% of Madison County’s measured area and water for 0.4%. Its combined area converts to 1,169.3 square kilometers or approximately 288,950 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land449.6181,164.505287,755.5
Water1.8664.8331,194.2
Total451.4841,169.338288,949.8

How Madison County compares

By original Census land area, Madison County ranks #53 of 100 in North Carolina and #2270 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.977 times the North Carolina county-equivalent median of 460.3 square miles. It accounts for 0.9% of the combined county land area in the state.

See the complete North Carolina ranking · What counts as a county equivalent?

Population and density of Madison County

The Census Bureau estimates that 22,553 people lived in Madison County on July 1, 2025. That ranks #1,754 of 3,222 county equivalents nationally and #76 of 100 in North Carolina. Since the April 1, 2020 estimates base of 21,201, the population has grown by 1,352 (+6.4%), compared with +7.2% for North Carolina as a whole.

With 449.6 square miles of land, that is 50 people per square mile (19 per km²), placing Madison County #1,553 nationally for density and #84 in North Carolina. The median county equivalent has 47 people per square mile; the North Carolina median is 116. Put another way, there are about 13 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate21,29221,73921,90822,04422,46622,553
Change—+447+169+136+422+87

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Madison County

3 incorporated places lie at least partly in Madison County. Together they are home to 3,630 people (16.1%); the other 18,923 (83.9%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Mars Hill town, with 2,280 residents in the county. The county seat, Marshall town, has 802 residents. By land, Marshall town is the largest at 4.009 mi².

Incorporated placePopulation 2025Since 2020Land mi²
Mars Hill town2,280+15%2.11
Marshall townCounty seat802+2.6%4.009
Hot Springs town548+5.2%2.867

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Madison County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Madison County is an outlying county of the Asheville, NC Metropolitan Statistical Area. Its 3 county equivalents have 422,345 residents on 1,479.1 square miles of land; Madison County accounts for 30.4% of the land and 5.3% of the residents. By combined land it ranks #221 of 393 metropolitan areas, and #135 by population. It belongs to the Asheville-Waynesville-Brevard, NC Combined Statistical Area.

County equivalentPopulation 2025Land mi²
Buncombe County277,417656.5
Henderson County122,375373
Madison County22,553449.6

ZIP codes

6 ZIP Code Tabulation Areas have land in Madison County; 3 of them have most of their land inside the county, and the others mainly cover neighboring areas.

287012874328748287532875428787

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Madison County

Madison County shares a land border with 6 county equivalents, including 3 in Tennessee. It has more land than 3 of them. The largest neighbor is Buncombe County (656.5 mi²) and the smallest is Unicoi County (186.1 mi²). Together with its neighbors, Madison County forms a block of 3,216.6 mi² of land, of which it holds 14%.

Map of Madison County and the 6 county equivalents that border it Buncombe County, North Carolina: 656.5 mi² landGreene County, Tennessee: 622.2 mi² landYancey County, North Carolina: 312.6 mi² landCocke County, Tennessee: 436.1 mi² landUnicoi County, Tennessee: 186.1 mi² landHaywood County, North Carolina: 553.6 mi² land
Madison County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. MadisonCompare
Buncombe County656.51.5× largerCompare
Greene CountyTennessee622.21.4× largerCompare
Haywood County553.61.2× largerCompare
Cocke CountyTennessee436.1about the sameCompare
Yancey County312.61.4× smallerCompare
Unicoi CountyTennessee186.12.4× smallerCompare

How big is Madison County compared with U.S. states?

Madison County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 2.3 times as much. North Carolina’s county land could hold about 108 areas the size of Madison County.

Land area: Madison County and the closest-sized states
Madison County449.6 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 21.2 miles (34.1 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Madison County?

Madison County has more land than 952 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Madison County449.6 mi²
North Carolina median460.3 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Madison County at #2,341 nationally by total area, 71 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.4%, compared with a national county-equivalent median of 1.2% — 0.8 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Madison County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#2269Sullivan County, Pennsylvania449.9Compare
#2270Madison County, North Carolina449.6This county
#2271Stokes County, North Carolina449.3Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.866478, -82.714233. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,164,506,134 m²; AWATER: 4,832,355 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Madison County?

Madison County, North Carolina has 449.6 square miles (1,164.5 km²) of land and 1.866 square miles of water, for a total area of 451.5 square miles. It ranks #2270 of 3,222 U.S. county equivalents by land area.

Is Madison County the largest county in North Carolina?

No. Madison County ranks #53 of 100 in North Carolina by land area. The largest is Robeson County, with 947.3 square miles of land.

What counties border Madison County?

Madison County shares a land border with Buncombe County, Greene County, Tennessee, Yancey County, Cocke County, Tennessee, Unicoi County, Tennessee, and Haywood County.

What is the population of Madison County?

The Census Bureau estimates Madison County had 22,553 residents on July 1, 2025, ranking #1,754 of 3,222 county equivalents. That is 50 people per square mile of land.

What is the county seat of Madison County?

The county seat of Madison County is Marshall.

What cities and towns are in Madison County?

Madison County has 3 incorporated places. The most populous are Mars Hill town, Marshall town, and Hot Springs town; 18,923 residents live outside any incorporated place.

Is Madison County part of a metropolitan area?

Yes. It is an outlying county of the Asheville, NC Metropolitan Statistical Area, which has 3 county equivalents and 422,345 residents.

How many ZIP codes are in Madison County?

6 ZIP Code Tabulation Areas have land in Madison County, and 3 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Madison County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 2.3 times as much land.

How many acres of land are in Madison County?

The land measurement converts to approximately 287,756 acres. Including water, total area is approximately 288,950 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset