Haywood County area

Haywood County, North Carolina covers 554.5 square miles: 553.6 square miles of land and 0.942 square miles of water. Its county seat is Waynesville. An estimated 63,369 people lived there in 2025.

Official Census measurements · GEOID 370872026 Gazetteer · retrieved September 27, 2026
Land area553.6 mi²
Water area0.942 mi²
Population (2025)63,369
People per mi²114

County outline

Generalized outline of Haywood County, North Carolina
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Haywood County is located

Haywood County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.8% of Haywood County’s measured area and water for 0.2%. Its combined area converts to 1,436.2 square kilometers or approximately 354,881 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land553.561,433.714354,278.4
Water0.9422.44602.9
Total554.5021,436.154354,881.3

How Haywood County compares

By original Census land area, Haywood County ranks #30 of 100 in North Carolina and #1881 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 1.203 times the North Carolina county-equivalent median of 460.3 square miles. It accounts for 1.1% of the combined county land area in the state.

See the complete North Carolina ranking · What counts as a county equivalent?

Population and density of Haywood County

The Census Bureau estimates that 63,369 people lived in Haywood County on July 1, 2025. That ranks #873 of 3,222 county equivalents nationally and #45 of 100 in North Carolina. Since the April 1, 2020 estimates base of 62,088, the population has grown by 1,281 (+2.1%), compared with +7.2% for North Carolina as a whole.

With 553.6 square miles of land, that is 114 people per square mile (44 per km²), placing Haywood County #905 nationally for density and #52 in North Carolina. The median county equivalent has 47 people per square mile; the North Carolina median is 116. Put another way, there are about 5.6 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate62,21962,53962,58862,94863,23363,369
Change—+320+49+360+285+136

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Haywood County

4 incorporated places lie at least partly in Haywood County. Together they are home to 18,527 people (29.2%); the other 44,842 (70.8%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Waynesville town, with 11,006 residents in the county. Among places with at least 1,000 residents in 2020, Waynesville town grew fastest since then (+8.6%).

Incorporated placePopulation 2025Since 2020Land mi²
Waynesville townCounty seat11,006+8.6%9.006
Canton town4,418+0.3%2.874
Maggie Valley town1,748+1%3.555
Clyde town1,355−0.8%0.865

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Haywood County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Haywood County is a central county of the Waynesville, NC Micropolitan Statistical Area. Haywood County is the area’s only county equivalent, so the micro area has the same 553.6 square miles of land. By combined land it ranks #399 of 542 micropolitan areas, and #146 by population. It belongs to the Asheville-Waynesville-Brevard, NC Combined Statistical Area.

ZIP codes

7 ZIP Code Tabulation Areas have land in Haywood County; 6 of them have most of their land inside the county, and the others mainly cover neighboring areas.

28716287212874328745287512878528786

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Haywood County

Haywood County shares a land border with 7 county equivalents, including 2 in Tennessee. It has more land than 5 of them. The largest neighbor is Buncombe County (656.5 mi²) and the smallest is Transylvania County (378.4 mi²). Together with its neighbors, Haywood County forms a block of 4,085.6 mi² of land, of which it holds 13.5%.

Map of Haywood County and the 7 county equivalents that border it Jackson County, North Carolina: 491.1 mi² landBuncombe County, North Carolina: 656.5 mi² landCocke County, Tennessee: 436.1 mi² landSwain County, North Carolina: 527.7 mi² landTransylvania County, North Carolina: 378.4 mi² landMadison County, North Carolina: 449.6 mi² landSevier County, Tennessee: 592.5 mi² land
Haywood County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. HaywoodCompare
Buncombe County656.51.2× largerCompare
Sevier CountyTennessee592.51.1× largerCompare
Swain County527.7about the sameCompare
Jackson County491.11.1× smallerCompare
Madison County449.61.2× smallerCompare
Cocke CountyTennessee436.11.3× smallerCompare
Transylvania County378.41.5× smallerCompare

How big is Haywood County compared with U.S. states?

Haywood County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.9 times as much. North Carolina’s county land could hold about 88 areas the size of Haywood County.

Land area: Haywood County and the closest-sized states
Haywood County553.6 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 23.5 miles (37.9 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Haywood County?

Haywood County has more land than 1,341 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Haywood County553.6 mi²
North Carolina median460.3 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Haywood County at #1,994 nationally by total area, 113 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.2%, compared with a national county-equivalent median of 1.2% — 1 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Haywood County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#1880Cherokee County, Alabama553.6Compare
#1881Haywood County, North Carolina553.6This county
#1882Webster County, West Virginia553.5Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.558882, -82.981307. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,433,713,876 m²; AWATER: 2,438,478 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Haywood County?

Haywood County, North Carolina has 553.6 square miles (1,433.7 km²) of land and 0.942 square miles of water, for a total area of 554.5 square miles. It ranks #1881 of 3,222 U.S. county equivalents by land area.

Is Haywood County the largest county in North Carolina?

No. Haywood County ranks #30 of 100 in North Carolina by land area. The largest is Robeson County, with 947.3 square miles of land.

What counties border Haywood County?

Haywood County shares a land border with Jackson County, Buncombe County, Cocke County, Tennessee, Swain County, Transylvania County, Madison County, and Sevier County, Tennessee.

What is the population of Haywood County?

The Census Bureau estimates Haywood County had 63,369 residents on July 1, 2025, ranking #873 of 3,222 county equivalents. That is 114 people per square mile of land.

What is the county seat of Haywood County?

The county seat of Haywood County is Waynesville.

What cities and towns are in Haywood County?

Haywood County has 4 incorporated places. The most populous are Waynesville town, Canton town, Maggie Valley town, and Clyde town; 44,842 residents live outside any incorporated place.

Is Haywood County part of a metropolitan area?

Yes. It is a central county of the Waynesville, NC Micropolitan Statistical Area.

How many ZIP codes are in Haywood County?

7 ZIP Code Tabulation Areas have land in Haywood County, and 6 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Haywood County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.9 times as much land.

How many acres of land are in Haywood County?

The land measurement converts to approximately 354,278 acres. Including water, total area is approximately 354,881 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset