Mercer County area

Mercer County, North Dakota covers 1,112.6 square miles: 1,042.8 square miles of land and 69.8 square miles of water. Its county seat is Stanton. An estimated 8,441 people lived there in 2025.

Official Census measurements · GEOID 380572026 Gazetteer · retrieved September 27, 2026
Land area1,042.8 mi²
Water area69.8 mi²
Population (2025)8,441
People per mi²8.1

County outline

Generalized outline of Mercer County, North Dakota
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Mercer County is located

Mercer County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 93.7% of Mercer County’s measured area and water for 6.3%. Its combined area converts to 2,881.6 square kilometers or approximately 712,062 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land1,042.7822,700.793667,380.5
Water69.815180.8244,681.6
Total1,112.5972,881.613712,062.1

How Mercer County compares

By original Census land area, Mercer County ranks #35 of 53 in North Dakota and #630 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.898 times the North Dakota county-equivalent median of 1,161.8 square miles. It accounts for 1.5% of the combined county land area in the state.

See the complete North Dakota ranking · What counts as a county equivalent?

Population and density of Mercer County

The Census Bureau estimates that 8,441 people lived in Mercer County on July 1, 2025. That ranks #2,622 of 3,222 county equivalents nationally and #17 of 53 in North Dakota. Since the April 1, 2020 estimates base of 8,355, the population has grown by 86 (+1%), compared with +2.6% for North Dakota as a whole.

With 1,042.8 square miles of land, that is 8.1 people per square mile (3.1 per km²), placing Mercer County #2,713 nationally for density and #13 in North Dakota. The median county equivalent has 47 people per square mile; the North Dakota median is 3.7. Put another way, there are about 79 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate8,3498,3378,3308,3298,3468,441
Change—−12−7−1+17+95

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Mercer County

6 incorporated places lie at least partly in Mercer County. Together they are home to 6,311 people (74.8%); the other 2,130 (25.2%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Beulah city, with 3,077 residents in the county. The county seat, Stanton city, has 367 residents. Among places with at least 1,000 residents in 2020, Hazen city grew fastest since then (+1.5%).

Incorporated placePopulation 2025Since 2020Land mi²
Beulah city3,077+0.6%2.443
Hazen city2,314+1.5%1.408
Stanton cityCounty seat367+0.3%0.355
Zap city229+1.3%1.018
Golden Valley city189−0.5%0.748
Pick City city135+8%0.189

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Mercer County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Mercer County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

10 ZIP Code Tabulation Areas have land in Mercer County; 5 of them have most of their land inside the county, and the others mainly cover neighboring areas.

58523585305854158545585715858058625586315863658638

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Mercer County

Mercer County shares a land border with 5 county equivalents. It has more land than 1 of them. The largest neighbor is McLean County (2,110.3 mi²) and the smallest is Oliver County (722.4 mi²). Together with its neighbors, Mercer County forms a block of 9,144.8 mi² of land, of which it holds 11.4%.

Map of Mercer County and the 5 county equivalents that border it McLean County, North Dakota: 2,110.3 mi² landOliver County, North Dakota: 722.4 mi² landDunn County, North Dakota: 2,008.6 mi² landMorton County, North Dakota: 1,925.9 mi² landStark County, North Dakota: 1,334.9 mi² land
Mercer County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. MercerCompare
McLean County2,110.32× largerCompare
Dunn County2,008.61.9× largerCompare
Morton County1,925.91.8× largerCompare
Stark County1,334.91.3× largerCompare
Oliver County722.41.4× smallerCompare

How big is Mercer County compared with U.S. states?

Mercer County has more land than 1 of the 50 states. It is about 1 times the land area of Rhode Island (1,033.9 mi²), while Delaware, the next larger state, has 1.9 times as much land (1,948.6 mi²). North Dakota’s county land could hold about 66 areas the size of Mercer County.

Land area: Mercer County and the closest-sized states
Rhode Island1,033.9 mi²
Mercer County1,042.8 mi²
Delaware1,948.6 mi²

Another way to picture it: the same land area would fill a square about 32.3 miles (52 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Mercer County?

Mercer County has more land than 2,592 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Mercer County1,042.8 mi²
North Dakota median1,161.8 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Mercer County at #659 nationally by total area, 29 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 6.3%, compared with a national county-equivalent median of 1.2% — 5.1 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Mercer County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#629Taylor County, Florida1,043.3Compare
#630Mercer County, North Dakota1,042.8This county
#631Erie County, New York1,042.8Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 47.303329, -101.822020. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,700,792,509 m²; AWATER: 180,821,041 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Mercer County?

Mercer County, North Dakota has 1,042.8 square miles (2,700.8 km²) of land and 69.8 square miles of water, for a total area of 1,112.6 square miles. It ranks #630 of 3,222 U.S. county equivalents by land area.

Is Mercer County the largest county in North Dakota?

No. Mercer County ranks #35 of 53 in North Dakota by land area. The largest is McKenzie County, with 2,760.1 square miles of land.

What counties border Mercer County?

Mercer County shares a land border with McLean County, Oliver County, Dunn County, Morton County, and Stark County.

What is the population of Mercer County?

The Census Bureau estimates Mercer County had 8,441 residents on July 1, 2025, ranking #2,622 of 3,222 county equivalents. That is 8.1 people per square mile of land.

What is the county seat of Mercer County?

The county seat of Mercer County is Stanton.

What cities and towns are in Mercer County?

Mercer County has 6 incorporated places. The most populous five are Beulah city, Hazen city, Stanton city, Zap city, and Golden Valley city; 2,130 residents live outside any incorporated place.

Is Mercer County part of a metropolitan area?

No. Mercer County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Mercer County?

10 ZIP Code Tabulation Areas have land in Mercer County, and 5 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Mercer County compare with U.S. states?

It has more land than 1 of the 50 states, including Rhode Island (1,033.9 square miles of land).

How many acres of land are in Mercer County?

The land measurement converts to approximately 667,380 acres. Including water, total area is approximately 712,062 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset