Bledsoe County area

Bledsoe County, Tennessee covers 406.9 square miles: 406.6 square miles of land and 0.332 square miles of water. Its county seat is Pikeville. An estimated 15,920 people lived there in 2025.

Official Census measurements · GEOID 470072026 Gazetteer · retrieved September 27, 2026
Land area406.6 mi²
Water area0.332 mi²
Population (2025)15,920
People per mi²39

County outline

Generalized outline of Bledsoe County, Tennessee
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Bledsoe County is located

Bledsoe County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.9% of Bledsoe County’s measured area and water for 0.1%. Its combined area converts to 1,053.8 square kilometers or approximately 260,408 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land406.5551,052.973260,195.2
Water0.3320.86212.5
Total406.8871,053.832260,407.7

How Bledsoe County compares

By original Census land area, Bledsoe County ranks #57 of 95 in Tennessee and #2492 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.932 times the Tennessee county-equivalent median of 436.1 square miles. It accounts for 1% of the combined county land area in the state.

See the complete Tennessee ranking · What counts as a county equivalent?

Population and density of Bledsoe County

The Census Bureau estimates that 15,920 people lived in Bledsoe County on July 1, 2025. That ranks #2,106 of 3,222 county equivalents nationally and #78 of 95 in Tennessee. Since the April 1, 2020 estimates base of 14,907, the population has grown by 1,013 (+6.8%), compared with +5.8% for Tennessee as a whole.

With 406.6 square miles of land, that is 39 people per square mile (15 per km²), placing Bledsoe County #1,769 nationally for density and #83 in Tennessee. The median county equivalent has 47 people per square mile; the Tennessee median is 76. Put another way, there are about 16 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate14,94514,83714,75514,99615,57315,920
Change—−108−82+241+577+347

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Bledsoe County

1 incorporated place lies at least partly in Bledsoe County. Together they are home to 1,872 people (11.8%); the other 14,048 (88.2%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Pikeville city, with 1,872 residents in the county.

Metropolitan area

Bledsoe County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

9 ZIP Code Tabulation Areas have land in Bledsoe County; 2 of them have most of their land inside the county, and the others mainly cover neighboring areas.

373213732737332373373733837367373793738138572

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Bledsoe County

Bledsoe County shares a land border with 5 county equivalents. It has more land than 3 of them. The largest neighbor is Cumberland County (681.3 mi²) and the smallest is Sequatchie County (265.9 mi²). Together with its neighbors, Bledsoe County forms a block of 2,484.8 mi² of land, of which it holds 16.4%.

Map of Bledsoe County and the 5 county equivalents that border it Rhea County, Tennessee: 315.5 mi² landSequatchie County, Tennessee: 265.9 mi² landCumberland County, Tennessee: 681.3 mi² landVan Buren County, Tennessee: 273.4 mi² landHamilton County, Tennessee: 542.2 mi² land
Bledsoe County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. BledsoeCompare
Cumberland County681.31.7× largerCompare
Hamilton County542.21.3× largerCompare
Rhea County315.51.3× smallerCompare
Van Buren County273.41.5× smallerCompare
Sequatchie County265.91.5× smallerCompare

How big is Bledsoe County compared with U.S. states?

Bledsoe County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 2.5 times as much. Tennessee’s county land could hold about 101 areas the size of Bledsoe County.

Land area: Bledsoe County and the closest-sized states
Bledsoe County406.6 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 20.2 miles (32.4 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Bledsoe County?

Bledsoe County has more land than 730 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Bledsoe County406.6 mi²
Tennessee median436.1 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Bledsoe County at #2,565 nationally by total area, 73 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.1%, compared with a national county-equivalent median of 1.2% — 1.1 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Bledsoe County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#2491Miami County, Ohio406.6Compare
#2492Bledsoe County, Tennessee406.6This county
#2493Benton County, Indiana406.4Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.593561, -85.205910. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,052,973,461 m²; AWATER: 858,669 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Bledsoe County?

Bledsoe County, Tennessee has 406.6 square miles (1,053 km²) of land and 0.332 square miles of water, for a total area of 406.9 square miles. It ranks #2492 of 3,222 U.S. county equivalents by land area.

Is Bledsoe County the largest county in Tennessee?

No. Bledsoe County ranks #57 of 95 in Tennessee by land area. The largest is Shelby County, with 752.8 square miles of land.

What counties border Bledsoe County?

Bledsoe County shares a land border with Rhea County, Sequatchie County, Cumberland County, Van Buren County, and Hamilton County.

What is the population of Bledsoe County?

The Census Bureau estimates Bledsoe County had 15,920 residents on July 1, 2025, ranking #2,106 of 3,222 county equivalents. That is 39 people per square mile of land.

What is the county seat of Bledsoe County?

The county seat of Bledsoe County is Pikeville.

Is Bledsoe County part of a metropolitan area?

No. Bledsoe County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Bledsoe County?

9 ZIP Code Tabulation Areas have land in Bledsoe County, and 2 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Bledsoe County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 2.5 times as much land.

How many acres of land are in Bledsoe County?

The land measurement converts to approximately 260,195 acres. Including water, total area is approximately 260,408 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset