County outline
Where Van Buren County is located
Area breakdown
Land accounts for 99.6% of Van Buren County’s measured area and water for 0.4%. Its combined area converts to 711 square kilometers or approximately 175,700 acres.
Green: land · blue: water
| Measurement | Square miles | Square kilometers | Acres |
|---|---|---|---|
| Land | 273.415 | 708.142 | 174,985.6 |
| Water | 1.117 | 2.893 | 714.9 |
| Total | 274.532 | 711.035 | 175,700.5 |
How Van Buren County compares
By original Census land area, Van Buren County ranks #80 of 95 in Tennessee and #2861 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.
Its land area is 0.627 times the Tennessee county-equivalent median of 436.1 square miles. It accounts for 0.7% of the combined county land area in the state.
See the complete Tennessee ranking · What counts as a county equivalent?
Population and density of Van Buren County
The Census Bureau estimates that 6,874 people lived in Van Buren County on July 1, 2025. That ranks #2,740 of 3,222 county equivalents nationally and #93 of 95 in Tennessee. Since the April 1, 2020 estimates base of 6,168, the population has grown by 706 (+11.4%), compared with +5.8% for Tennessee as a whole.
With 273.4 square miles of land, that is 25 people per square mile (9.7 per km²), placing Van Buren County #2,142 nationally for density and #93 in Tennessee. The median county equivalent has 47 people per square mile; the Tennessee median is 76. Put another way, there are about 25 acres of land per resident.
| July 1 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|
| Estimate | 6,174 | 6,297 | 6,457 | 6,576 | 6,683 | 6,874 |
| Change | — | +123 | +160 | +119 | +107 | +191 |
U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.
Cities and towns in Van Buren County
1 incorporated place lies at least partly in Van Buren County. Together they are home to 1,636 people (23.8%); the other 5,238 (76.2%) live outside any incorporated place, in unincorporated communities and rural areas.
The largest is Spencer city, with 1,636 residents in the county.
Metropolitan area
Van Buren County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.
ZIP codes
7 ZIP Code Tabulation Areas have land in Van Buren County; 2 of them have most of their land inside the county, and the others mainly cover neighboring areas.
37110373273736738559385813858338585
ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.
Counties bordering Van Buren County
Van Buren County shares a land border with 5 county equivalents. It has more land than 1 of them. The largest neighbor is Cumberland County (681.3 mi²) and the smallest is Sequatchie County (265.9 mi²). Together with its neighbors, Van Buren County forms a block of 2,436.5 mi² of land, of which it holds 11.2%.
| Bordering county equivalent | Land mi² | Size vs. Van Buren | Compare |
|---|---|---|---|
| Cumberland County | 681.3 | 2.5× larger | Compare |
| Warren County | 432.7 | 1.6× larger | Compare |
| Bledsoe County | 406.6 | 1.5× larger | Compare |
| White County | 376.7 | 1.4× larger | Compare |
| Sequatchie County | 265.9 | about the same | Compare |
How big is Van Buren County compared with U.S. states?
Van Buren County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 3.8 times as much. Tennessee’s county land could hold about 151 areas the size of Van Buren County.
Another way to picture it: the same land area would fill a square about 16.5 miles (26.6 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.
State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.
What stands out about Van Buren County?
Van Buren County has more land than 361 of the other 3,221 county equivalents in the dataset.
A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.
Does including water change its rank?
Using land plus water places Van Buren County at #2,898 nationally by total area, 37 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.
Its water share is 0.4%, compared with a national county-equivalent median of 1.2% — 0.8 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.
Closest positions in the national land ranking
These entries sit immediately beside Van Buren County in the national ranking. They can be in different states and are not necessarily geographic neighbors.
| Land rank | County equivalent | Land mi² | Comparison |
|---|---|---|---|
| #2860 | Newton County, Georgia | 273.8 | Compare |
| #2861 | Van Buren County, Tennessee | 273.4 | This county |
| #2862 | Gregg County, Texas | 273.4 | Compare |
Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.
Representative coordinates
The Census internal point is 35.699239, -85.458412. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.
Source and precision
U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 708,142,397 m²; AWATER: 2,893,456 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.
Common questions
How big is Van Buren County?
Van Buren County, Tennessee has 273.4 square miles (708.1 km²) of land and 1.117 square miles of water, for a total area of 274.5 square miles. It ranks #2861 of 3,222 U.S. county equivalents by land area.
Is Van Buren County the largest county in Tennessee?
No. Van Buren County ranks #80 of 95 in Tennessee by land area. The largest is Shelby County, with 752.8 square miles of land.
What counties border Van Buren County?
Van Buren County shares a land border with White County, Warren County, Bledsoe County, Sequatchie County, and Cumberland County.
What is the population of Van Buren County?
The Census Bureau estimates Van Buren County had 6,874 residents on July 1, 2025, ranking #2,740 of 3,222 county equivalents. That is 25 people per square mile of land.
What is the county seat of Van Buren County?
The county seat of Van Buren County is Spencer.
Is Van Buren County part of a metropolitan area?
No. Van Buren County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.
How many ZIP codes are in Van Buren County?
7 ZIP Code Tabulation Areas have land in Van Buren County, and 2 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.
How does Van Buren County compare with U.S. states?
It has less land than every state. Rhode Island, the smallest, has 3.8 times as much land.
How many acres of land are in Van Buren County?
The land measurement converts to approximately 174,986 acres. Including water, total area is approximately 175,700 acres. One square mile equals 640 acres.
Why might another source show a different area?
Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.
Can this establish a property boundary?
No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.