Polk County area

Polk County, Tennessee covers 442.3 square miles: 434.6 square miles of land and 7.686 square miles of water. Its county seat is Benton. An estimated 18,592 people lived there in 2025.

Official Census measurements · GEOID 471392026 Gazetteer · retrieved September 27, 2026
Land area434.6 mi²
Water area7.686 mi²
Population (2025)18,592
People per mi²43

County outline

Generalized outline of Polk County, Tennessee
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Polk County is located

Polk County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 98.3% of Polk County’s measured area and water for 1.7%. Its combined area converts to 1,145.5 square kilometers or approximately 283,066 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land434.6051,125.622278,147.2
Water7.68619.9074,919
Total442.2911,145.528283,066.2

How Polk County compares

By original Census land area, Polk County ranks #50 of 95 in Tennessee and #2335 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.996 times the Tennessee county-equivalent median of 436.1 square miles. It accounts for 1.1% of the combined county land area in the state.

See the complete Tennessee ranking · What counts as a county equivalent?

Population and density of Polk County

The Census Bureau estimates that 18,592 people lived in Polk County on July 1, 2025. That ranks #1,965 of 3,222 county equivalents nationally and #71 of 95 in Tennessee. Since the April 1, 2020 estimates base of 17,536, the population has grown by 1,056 (+6%), compared with +5.8% for Tennessee as a whole.

With 434.6 square miles of land, that is 43 people per square mile (17 per km²), placing Polk County #1,691 nationally for density and #75 in Tennessee. The median county equivalent has 47 people per square mile; the Tennessee median is 76. Put another way, there are about 15 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate17,55817,70417,77618,06418,40818,592
Change—+146+72+288+344+184

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Polk County

3 incorporated places lie at least partly in Polk County. Together they are home to 2,375 people (12.8%); the other 16,217 (87.2%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Benton town, with 1,476 residents in the county.

Incorporated placePopulation 2025Since 2020Land mi²
Benton townCounty seat1,476−3.1%3.033
Copperhill city458+5.8%1.769
Ducktown city441−3.9%2.641

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Polk County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Polk County is an outlying county of the Cleveland, TN Metropolitan Statistical Area. Its 2 county equivalents have 134,057 residents on 763.4 square miles of land; Polk County accounts for 56.9% of the land and 13.9% of the residents. By combined land it ranks #311 of 393 metropolitan areas, and #314 by population. It belongs to the Chattanooga-Cleveland-Dalton, TN-GA-AL Combined Statistical Area.

County equivalentPopulation 2025Land mi²
Bradley County115,465328.8
Polk County18,592434.6

ZIP codes

13 ZIP Code Tabulation Areas have land in Polk County; 10 of them have most of their land inside the county, and the others mainly cover neighboring areas.

37307373093731037316373173732337325373263733337361373623736937391

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Polk County

Polk County shares a land border with 6 county equivalents, including 3 in Georgia and North Carolina. It has more land than 4 of them. The largest neighbor is Monroe County (635.8 mi²) and the smallest is Bradley County (328.8 mi²). Together with its neighbors, Polk County forms a block of 3,016.4 mi² of land, of which it holds 14.4%.

Map of Polk County and the 6 county equivalents that border it Bradley County, Tennessee: 328.8 mi² landFannin County, Georgia: 387.2 mi² landCherokee County, North Carolina: 455.5 mi² landMonroe County, Tennessee: 635.8 mi² landMcMinn County, Tennessee: 430.1 mi² landMurray County, Georgia: 344.5 mi² land
Polk County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. PolkCompare
Monroe County635.81.5× largerCompare
Cherokee CountyNorth Carolina455.5about the sameCompare
McMinn County430.1about the sameCompare
Fannin CountyGeorgia387.21.1× smallerCompare
Murray CountyGeorgia344.51.3× smallerCompare
Bradley County328.81.3× smallerCompare

How big is Polk County compared with U.S. states?

Polk County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 2.4 times as much. Tennessee’s county land could hold about 95 areas the size of Polk County.

Land area: Polk County and the closest-sized states
Polk County434.6 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 20.8 miles (33.6 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Polk County?

Polk County has more land than 887 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Polk County434.6 mi²
Tennessee median436.1 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Polk County at #2,380 nationally by total area, 45 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 1.7%, compared with a national county-equivalent median of 1.2% — 0.6 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Polk County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#2334Claiborne County, Tennessee434.6Compare
#2335Polk County, Tennessee434.6This county
#2336Hanson County, South Dakota434.6Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.109437, -84.541112. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,125,622,658 m²; AWATER: 19,906,877 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Polk County?

Polk County, Tennessee has 434.6 square miles (1,125.6 km²) of land and 7.686 square miles of water, for a total area of 442.3 square miles. It ranks #2335 of 3,222 U.S. county equivalents by land area.

Is Polk County the largest county in Tennessee?

No. Polk County ranks #50 of 95 in Tennessee by land area. The largest is Shelby County, with 752.8 square miles of land.

What counties border Polk County?

Polk County shares a land border with Bradley County, Fannin County, Georgia, Cherokee County, North Carolina, Monroe County, McMinn County, and Murray County, Georgia.

What is the population of Polk County?

The Census Bureau estimates Polk County had 18,592 residents on July 1, 2025, ranking #1,965 of 3,222 county equivalents. That is 43 people per square mile of land.

What is the county seat of Polk County?

The county seat of Polk County is Benton.

What cities and towns are in Polk County?

Polk County has 3 incorporated places. The most populous are Benton town, Copperhill city, and Ducktown city; 16,217 residents live outside any incorporated place.

Is Polk County part of a metropolitan area?

Yes. It is an outlying county of the Cleveland, TN Metropolitan Statistical Area, which has 2 county equivalents and 134,057 residents.

How many ZIP codes are in Polk County?

13 ZIP Code Tabulation Areas have land in Polk County, and 10 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Polk County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 2.4 times as much land.

How many acres of land are in Polk County?

The land measurement converts to approximately 278,147 acres. Including water, total area is approximately 283,066 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset