Wilson County area

Wilson County, Texas covers 808.4 square miles: 803.7 square miles of land and 4.675 square miles of water. Its county seat is Floresville. An estimated 56,139 people lived there in 2025.

Official Census measurements · GEOID 484932026 Gazetteer · retrieved September 27, 2026
Land area803.7 mi²
Water area4.675 mi²
Population (2025)56,139
People per mi²70

County outline

Generalized outline of Wilson County, Texas
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Wilson County is located

Wilson County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.4% of Wilson County’s measured area and water for 0.6%. Its combined area converts to 2,093.8 square kilometers or approximately 517,382 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land803.7352,081.664514,390.4
Water4.67512.1082,992
Total808.412,093.772517,382.4

How Wilson County compares

By original Census land area, Wilson County ranks #195 of 254 in Texas and #1057 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.885 times the Texas county-equivalent median of 908.7 square miles. It accounts for 0.3% of the combined county land area in the state.

See the complete Texas ranking · What counts as a county equivalent?

Population and density of Wilson County

The Census Bureau estimates that 56,139 people lived in Wilson County on July 1, 2025. That ranks #951 of 3,222 county equivalents nationally and #66 of 254 in Texas. Since the April 1, 2020 estimates base of 49,753, the population has grown by 6,386 (+12.8%), compared with +8.8% for Texas as a whole.

With 803.7 square miles of land, that is 70 people per square mile (27 per km²), placing Wilson County #1,262 nationally for density and #64 in Texas. The median county equivalent has 47 people per square mile; the Texas median is 22. Put another way, there are about 9.2 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate50,05151,32552,75254,29655,32156,139
Change—+1,274+1,427+1,544+1,025+818

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Wilson County

6 incorporated places lie at least partly in Wilson County. Together they are home to 14,114 people (25.1%); the other 42,025 (74.9%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Floresville city, with 9,105 residents in the county. Among places with at least 1,000 residents in 2020, La Vernia city grew fastest since then (+38.8%).

Incorporated placePopulation 2025Since 2020Land mi²
Floresville cityCounty seat9,105+26%7.691
Poth town2,014+10.7%3.166
La Vernia city1,499+38.8%2.389
Stockdale city1,494+6.2%1.688
Elmendorf cityAlso in 1 other county2+100%6.142
Nixon cityAlso in 1 other county0—1.563

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Wilson County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Wilson County is an outlying county of the San Antonio-New Braunfels, TX Metropolitan Statistical Area. Its 8 county equivalents have 2,813,140 residents on 7,313.3 square miles of land; Wilson County accounts for 11% of the land and 2% of the residents. By combined land it ranks #24 of 393 metropolitan areas, and #24 by population. It belongs to the San Antonio-New Braunfels-Kerrville, TX Combined Statistical Area.

County equivalentPopulation 2025Land mi²
Bexar County2,160,0881,240.5
Comal County209,166559.5
Guadalupe County201,111711.2
Medina County56,8811,325.4
Wilson County56,139803.7
Atascosa County53,5901,219.5
Kendall County53,289662.5
Bandera County22,876791

ZIP codes

12 ZIP Code Tabulation Areas have land in Wilson County; 6 of them have most of their land inside the county, and the others mainly cover neighboring areas.

780647810178112781137811478121781407814378147781607816178223

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Wilson County

Wilson County shares a land border with 5 county equivalents. It has more land than 2 of them. The largest neighbor is Bexar County (1,240.5 mi²) and the smallest is Guadalupe County (711.2 mi²). Together with its neighbors, Wilson County forms a block of 5,789.4 mi² of land, of which it holds 13.9%.

Map of Wilson County and the 5 county equivalents that border it Karnes County, Texas: 747.8 mi² landBexar County, Texas: 1,240.5 mi² landAtascosa County, Texas: 1,219.5 mi² landGuadalupe County, Texas: 711.2 mi² landGonzales County, Texas: 1,066.7 mi² land
Wilson County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. WilsonCompare
Bexar County1,240.51.5× largerCompare
Atascosa County1,219.51.5× largerCompare
Gonzales County1,066.71.3× largerCompare
Karnes County747.81.1× smallerCompare
Guadalupe County711.21.1× smallerCompare

How big is Wilson County compared with U.S. states?

Wilson County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.3 times as much. Texas’s county land could hold about 325 areas the size of Wilson County.

Land area: Wilson County and the closest-sized states
Wilson County803.7 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 28.4 miles (45.6 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Wilson County?

Wilson County has more land than 2,165 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Wilson County803.7 mi²
Texas median908.7 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Wilson County at #1,156 nationally by total area, 99 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.6%, compared with a national county-equivalent median of 1.2% — 0.6 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Wilson County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#1056Hughes County, Oklahoma804.5Compare
#1057Wilson County, Texas803.7This county
#1058Jackson County, Oklahoma802.7Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 29.173883, -98.086734. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,081,664,826 m²; AWATER: 12,109,332 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Wilson County?

Wilson County, Texas has 803.7 square miles (2,081.7 km²) of land and 4.675 square miles of water, for a total area of 808.4 square miles. It ranks #1057 of 3,222 U.S. county equivalents by land area.

Is Wilson County the largest county in Texas?

No. Wilson County ranks #195 of 254 in Texas by land area. The largest is Brewster County, with 6,183.8 square miles of land.

What counties border Wilson County?

Wilson County shares a land border with Karnes County, Bexar County, Atascosa County, Guadalupe County, and Gonzales County.

What is the population of Wilson County?

The Census Bureau estimates Wilson County had 56,139 residents on July 1, 2025, ranking #951 of 3,222 county equivalents. That is 70 people per square mile of land.

What is the county seat of Wilson County?

The county seat of Wilson County is Floresville.

What cities and towns are in Wilson County?

Wilson County has 6 incorporated places. The most populous five are Floresville city, Poth town, La Vernia city, Stockdale city, and Elmendorf city; 42,025 residents live outside any incorporated place.

Is Wilson County part of a metropolitan area?

Yes. It is an outlying county of the San Antonio-New Braunfels, TX Metropolitan Statistical Area, which has 8 county equivalents and 2,813,140 residents.

How many ZIP codes are in Wilson County?

12 ZIP Code Tabulation Areas have land in Wilson County, and 6 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Wilson County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.3 times as much land.

How many acres of land are in Wilson County?

The land measurement converts to approximately 514,390 acres. Including water, total area is approximately 517,382 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset