Sheridan County area

Sheridan County, North Dakota covers 1,005.5 square miles: 972.2 square miles of land and 33.3 square miles of water. Its county seat is McClusky. An estimated 1,296 people lived there in 2025.

Official Census measurements · GEOID 380832026 Gazetteer · retrieved September 27, 2026
Land area972.2 mi²
Water area33.3 mi²
Population (2025)1,296
People per mi²1.3

County outline

Generalized outline of Sheridan County, North Dakota
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Sheridan County is located

Sheridan County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 96.7% of Sheridan County’s measured area and water for 3.3%. Its combined area converts to 2,604.3 square kilometers or approximately 643,525 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land972.2262,518.054622,224.6
Water33.28286.221,300.5
Total1,005.5082,604.254643,525.1

How Sheridan County compares

By original Census land area, Sheridan County ranks #43 of 53 in North Dakota and #718 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 0.837 times the North Dakota county-equivalent median of 1,161.8 square miles. It accounts for 1.4% of the combined county land area in the state.

See the complete North Dakota ranking · What counts as a county equivalent?

Population and density of Sheridan County

The Census Bureau estimates that 1,296 people lived in Sheridan County on July 1, 2025. That ranks #3,170 of 3,222 county equivalents nationally and #51 of 53 in North Dakota. Since the April 1, 2020 estimates base of 1,267, the population has grown by 29 (+2.3%), compared with +2.6% for North Dakota as a whole.

With 972.2 square miles of land, that is 1.3 people per square mile (0.51 per km²), placing Sheridan County #3,120 nationally for density and #50 in North Dakota. The median county equivalent has 47 people per square mile; the North Dakota median is 3.7. Put another way, there are about 480 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate1,2621,2641,2851,2951,2741,296
Change—+2+21+10−21+22

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Sheridan County

3 incorporated places lie at least partly in Sheridan County. Together they are home to 491 people (37.9%); the other 805 (62.1%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is McClusky city, with 320 residents in the county.

Incorporated placePopulation 2025Since 2020Land mi²
McClusky cityCounty seat320−1.2%0.371
Goodrich city109−1.8%0.292
Martin city620%0.089

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Sheridan County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Sheridan County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.

ZIP codes

9 ZIP Code Tabulation Areas have land in Sheridan County; 4 of them have most of their land inside the county, and the others mainly cover neighboring areas.

583415843058444584635855958710587235873658758

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Sheridan County

Sheridan County shares a land border with 6 county equivalents. Each of them has more land than Sheridan County. The largest neighbor is McLean County (2,110.3 mi²) and the smallest is Pierce County (1,018.3 mi²). Together with its neighbors, Sheridan County forms a block of 10,229 mi² of land, of which it holds 9.5%.

Map of Sheridan County and the 6 county equivalents that border it McLean County, North Dakota: 2,110.3 mi² landWells County, North Dakota: 1,270.5 mi² landBurleigh County, North Dakota: 1,632.7 mi² landMcHenry County, North Dakota: 1,873.9 mi² landPierce County, North Dakota: 1,018.3 mi² landKidder County, North Dakota: 1,351.1 mi² land
Sheridan County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. SheridanCompare
McLean County2,110.32.2× largerCompare
McHenry County1,873.91.9× largerCompare
Burleigh County1,632.71.7× largerCompare
Kidder County1,351.11.4× largerCompare
Wells County1,270.51.3× largerCompare
Pierce County1,018.3about the sameCompare

How big is Sheridan County compared with U.S. states?

Sheridan County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.1 times as much. North Dakota’s county land could hold about 71 areas the size of Sheridan County.

Land area: Sheridan County and the closest-sized states
Sheridan County972.2 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 31.2 miles (50.2 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Sheridan County?

Sheridan County has more land than 2,504 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Sheridan County972.2 mi²
North Dakota median1,161.8 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Sheridan County at #767 nationally by total area, 49 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 3.3%, compared with a national county-equivalent median of 1.2% — 2.1 percentage points higher. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Sheridan County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#717Kossuth County, Iowa972.7Compare
#718Sheridan County, North Dakota972.2This county
#719Wilbarger County, Texas970.9Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 47.581376, -100.330964. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 2,518,053,303 m²; AWATER: 86,198,847 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Sheridan County?

Sheridan County, North Dakota has 972.2 square miles (2,518.1 km²) of land and 33.3 square miles of water, for a total area of 1,005.5 square miles. It ranks #718 of 3,222 U.S. county equivalents by land area.

Is Sheridan County the largest county in North Dakota?

No. Sheridan County ranks #43 of 53 in North Dakota by land area. The largest is McKenzie County, with 2,760.1 square miles of land.

What counties border Sheridan County?

Sheridan County shares a land border with McLean County, Wells County, Burleigh County, McHenry County, Pierce County, and Kidder County.

What is the population of Sheridan County?

The Census Bureau estimates Sheridan County had 1,296 residents on July 1, 2025, ranking #3,170 of 3,222 county equivalents. That is 1.3 people per square mile of land.

What is the county seat of Sheridan County?

The county seat of Sheridan County is McClusky.

What cities and towns are in Sheridan County?

Sheridan County has 3 incorporated places. The most populous are McClusky city, Goodrich city, and Martin city; 805 residents live outside any incorporated place.

Is Sheridan County part of a metropolitan area?

No. Sheridan County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.

How many ZIP codes are in Sheridan County?

9 ZIP Code Tabulation Areas have land in Sheridan County, and 4 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Sheridan County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.1 times as much land.

How many acres of land are in Sheridan County?

The land measurement converts to approximately 622,225 acres. Including water, total area is approximately 643,525 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset