County outline
Where Bennett County is located
Area breakdown
Land accounts for 99.5% of Bennett County’s measured area and water for 0.5%. Its combined area converts to 3,083.3 square kilometers or approximately 761,889 acres.
Green: land · blue: water
| Measurement | Square miles | Square kilometers | Acres |
|---|---|---|---|
| Land | 1,184.642 | 3,068.209 | 758,170.9 |
| Water | 5.809 | 15.045 | 3,717.8 |
| Total | 1,190.451 | 3,083.254 | 761,888.6 |
How Bennett County compares
By original Census land area, Bennett County ranks #23 of 66 in South Dakota and #516 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.
Its land area is 1.303 times the South Dakota county-equivalent median of 909.3 square miles. It accounts for 1.6% of the combined county land area in the state.
See the complete South Dakota ranking · What counts as a county equivalent?
Population and density of Bennett County
The Census Bureau estimates that 3,307 people lived in Bennett County on July 1, 2025. That ranks #3,011 of 3,222 county equivalents nationally and #45 of 66 in South Dakota. Since the April 1, 2020 estimates base of 3,383, the population has declined by 76 (−2.2%), compared with +5.5% for South Dakota as a whole.
With 1,184.6 square miles of land, that is 2.8 people per square mile (1.1 per km²), placing Bennett County #2,999 nationally for density and #48 in South Dakota. The median county equivalent has 47 people per square mile; the South Dakota median is 5.7. Put another way, there are about 229 acres of land per resident.
| July 1 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|
| Estimate | 3,397 | 3,398 | 3,337 | 3,314 | 3,306 | 3,307 |
| Change | — | +1 | −61 | −23 | −8 | +1 |
U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.
Cities and towns in Bennett County
1 incorporated place lies at least partly in Bennett County. Together they are home to 930 people (28.1%); the other 2,377 (71.9%) live outside any incorporated place, in unincorporated communities and rural areas.
The largest is Martin city, with 930 residents in the county.
Metropolitan area
Bennett County is not part of any metropolitan or micropolitan statistical area in the Office of Management and Budget’s July 2023 delineation; 1,306 other county equivalents are also outside one. These areas are built around an urban core of at least 10,000 people plus the counties tied to it by commuting, so counties outside them are generally rural.
ZIP codes
7 ZIP Code Tabulation Areas have land in Bennett County; 3 of them have most of their land inside the county, and the others mainly cover neighboring areas.
57551575605757457577577145771657752
ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.
Counties bordering Bennett County
Bennett County shares a land border with 4 county equivalents, including 1 in Nebraska. Each of them has more land than Bennett County. The largest neighbor is Cherry County (5,960.1 mi²) and the smallest is Todd County (1,388.6 mi²). Together with its neighbors, Bennett County forms a block of 12,490.8 mi² of land, of which it holds 9.5%.
| Bordering county equivalent | Land mi² | Size vs. Bennett | Compare |
|---|---|---|---|
| Cherry CountyNebraska | 5,960.1 | 5× larger | Compare |
| Oglala Lakota County | 2,093.6 | 1.8× larger | Compare |
| Jackson County | 1,863.9 | 1.6× larger | Compare |
| Todd County | 1,388.6 | 1.2× larger | Compare |
How big is Bennett County compared with U.S. states?
Bennett County has more land than 1 of the 50 states. It is about 1.1 times the land area of Rhode Island (1,033.9 mi²), while Delaware, the next larger state, has 1.6 times as much land (1,948.6 mi²). South Dakota’s county land could hold about 64 areas the size of Bennett County.
Another way to picture it: the same land area would fill a square about 34.4 miles (55.4 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.
State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.
What stands out about Bennett County?
Bennett County has more land than 2,706 of the other 3,221 county equivalents in the dataset.
A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.
Does including water change its rank?
Using land plus water places Bennett County at #595 nationally by total area, 79 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.
Its water share is 0.5%, compared with a national county-equivalent median of 1.2% — 0.7 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.
Closest positions in the national land ranking
These entries sit immediately beside Bennett County in the national ranking. They can be in different states and are not necessarily geographic neighbors.
| Land rank | County equivalent | Land mi² | Comparison |
|---|---|---|---|
| #515 | Ramsey County, North Dakota | 1,185.4 | Compare |
| #516 | Bennett County, South Dakota | 1,184.6 | This county |
| #517 | McLean County, Illinois | 1,183.2 | Compare |
Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.
Representative coordinates
The Census internal point is 43.186912, -101.677181. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.
Source and precision
U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 3,068,208,298 m²; AWATER: 15,044,356 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.
Common questions
How big is Bennett County?
Bennett County, South Dakota has 1,184.6 square miles (3,068.2 km²) of land and 5.809 square miles of water, for a total area of 1,190.5 square miles. It ranks #516 of 3,222 U.S. county equivalents by land area.
Is Bennett County the largest county in South Dakota?
No. Bennett County ranks #23 of 66 in South Dakota by land area. The largest is Meade County, with 3,470.9 square miles of land.
What counties border Bennett County?
Bennett County shares a land border with Jackson County, Cherry County, Nebraska, Todd County, and Oglala Lakota County.
What is the population of Bennett County?
The Census Bureau estimates Bennett County had 3,307 residents on July 1, 2025, ranking #3,011 of 3,222 county equivalents. That is 2.8 people per square mile of land.
What is the county seat of Bennett County?
The county seat of Bennett County is Martin.
Is Bennett County part of a metropolitan area?
No. Bennett County is outside every metropolitan and micropolitan statistical area in the July 2023 OMB delineation.
How many ZIP codes are in Bennett County?
7 ZIP Code Tabulation Areas have land in Bennett County, and 3 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.
How does Bennett County compare with U.S. states?
It has more land than 1 of the 50 states, including Rhode Island (1,033.9 square miles of land).
How many acres of land are in Bennett County?
The land measurement converts to approximately 758,171 acres. Including water, total area is approximately 761,889 acres. One square mile equals 640 acres.
Why might another source show a different area?
Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.
Can this establish a property boundary?
No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.