Williamson County area

Williamson County, Tennessee covers 584.1 square miles: 582.9 square miles of land and 1.163 square miles of water. Its county seat is Franklin. An estimated 272,061 people lived there in 2025.

Official Census measurements · GEOID 471872026 Gazetteer · retrieved September 27, 2026
Land area582.9 mi²
Water area1.163 mi²
Population (2025)272,061
People per mi²467

County outline

Generalized outline of Williamson County, Tennessee
2025 Census cartographic boundary, fitted to this frame. County maps are not at a common scale. The 2026 area measurements below come from the separate Gazetteer release. Map source and limitations.

Where Williamson County is located

Williamson County highlighted on a map of all U.S. county equivalents. About the maps

Area breakdown

Land accounts for 99.8% of Williamson County’s measured area and water for 0.2%. Its combined area converts to 1,512.7 square kilometers or approximately 373,807 acres.

Green: land · blue: water

MeasurementSquare milesSquare kilometersAcres
Land582.9111,509.733373,063
Water1.1633.012744.3
Total584.0741,512.745373,807.4

How Williamson County compares

By original Census land area, Williamson County ranks #16 of 95 in Tennessee and #1688 of 3,222 nationally. National rankings include the 50 states, District of Columbia, and Puerto Rico.

Its land area is 1.337 times the Tennessee county-equivalent median of 436.1 square miles. It accounts for 1.4% of the combined county land area in the state.

See the complete Tennessee ranking · What counts as a county equivalent?

Population and density of Williamson County

The Census Bureau estimates that 272,061 people lived in Williamson County on July 1, 2025. That ranks #274 of 3,222 county equivalents nationally and #6 of 95 in Tennessee. Since the April 1, 2020 estimates base of 247,790, the population has grown by 24,271 (+9.8%), compared with +5.8% for Tennessee as a whole.

With 582.9 square miles of land, that is 467 people per square mile (180 per km²), placing Williamson County #359 nationally for density and #6 in Tennessee. The median county equivalent has 47 people per square mile; the Tennessee median is 76. Put another way, there are about 1.4 acres of land per resident.

Estimated population, 2020–2025 · line scaled to this county’s own range
July 1202020212022202320242025
Estimate249,614256,192261,335264,898268,486272,061
Change—+6,578+5,143+3,563+3,588+3,575

U.S. Census Bureau, Vintage 2025 population estimates. Estimates are revised each year and are not decennial census counts. Density divides the whole population by the whole county’s land area, so it describes an average, not how settlement is distributed within the county. Population sources and methods.

Cities and towns in Williamson County

8 incorporated places lie at least partly in Williamson County. Together they are home to 211,385 people (77.7%); the other 60,676 (22.3%) live outside any incorporated place, in unincorporated communities and rural areas.

The largest is Franklin city, with 90,226 residents in the county. Among places with at least 1,000 residents in 2020, Thompson's Station town grew fastest since then (+27.2%).

Incorporated placePopulation 2025Since 2020Land mi²
Franklin cityCounty seat90,226+8%44.6
Brentwood city45,313−0.1%42.2
Spring Hill cityAlso in 1 other county39,711+18.3%29.7
Nolensville town15,789+14.3%10.8
Fairview city10,877+15.9%18.4
Thompson's Station town9,469+27.2%24.2
Eagleville cityAlso in 1 other county0—3.289
Smyrna townAlso in 1 other county0—35.2

Population: U.S. Census Bureau Vintage 2025 subcounty estimates, counting only the part of each place inside Williamson County. Land: 2026 Census Gazetteer, for the whole place even where it extends into other counties. How communities are listed.

Metropolitan area

Williamson County is a central county of the Nashville-Davidson--Murfreesboro--Franklin, TN Metropolitan Statistical Area. Its 14 county equivalents have 2,197,416 residents on 6,302.2 square miles of land; Williamson County accounts for 9.2% of the land and 12.4% of the residents. By combined land it ranks #31 of 393 metropolitan areas, and #34 by population. It belongs to the Nashville-Davidson--Murfreesboro, TN Combined Statistical Area.

County equivalentPopulation 2025Land mi²
Davidson County745,904503.5
Rutherford County386,352619.5
Williamson County272,061582.9
Sumner County215,538529.5
Wilson County175,033571.1
Maury County118,131613.1
Robertson County80,175476.3
Dickson County58,662489.9
Cheatham County42,778302.5
Macon County27,663307.1
Hickman County26,219612.5
Smith County20,981314.3
Cannon County15,296265.6
Trousdale County12,623114.3

ZIP codes

16 ZIP Code Tabulation Areas have land in Williamson County; 9 of them have most of their land inside the county, and the others mainly cover neighboring areas.

37014370253702737046370603706237064370673706937135371743717937215372213840138476

ZIP Code Tabulation Areas are the Census Bureau’s approximations of USPS ZIP Code service areas, from the 2020 Census relationship files. Lighter codes have less than half of their land in this county. Post-office-box and single-address ZIP Codes have no tabulation area.

Counties bordering Williamson County

Williamson County shares a land border with 7 county equivalents. It has more land than 4 of them. The largest neighbor is Rutherford County (619.5 mi²) and the smallest is Cheatham County (302.5 mi²). Together with its neighbors, Williamson County forms a block of 4,099.4 mi² of land, of which it holds 14.2%.

Map of Williamson County and the 7 county equivalents that border it Davidson County, Tennessee: 503.5 mi² landMaury County, Tennessee: 613.1 mi² landRutherford County, Tennessee: 619.5 mi² landHickman County, Tennessee: 612.5 mi² landCheatham County, Tennessee: 302.5 mi² landDickson County, Tennessee: 489.9 mi² landMarshall County, Tennessee: 375.5 mi² land
Williamson County (dark) and its bordering county equivalents. Select a neighbor to open its profile. Drawn from the 2025 Census cartographic boundaries in an equal-area projection. How borders are determined.
Bordering county equivalentLand mi²Size vs. WilliamsonCompare
Rutherford County619.51.1× largerCompare
Maury County613.11.1× largerCompare
Hickman County612.51.1× largerCompare
Davidson County503.51.2× smallerCompare
Dickson County489.91.2× smallerCompare
Marshall County375.51.6× smallerCompare
Cheatham County302.51.9× smallerCompare

How big is Williamson County compared with U.S. states?

Williamson County has less land than any of the 50 states. Rhode Island, the smallest state by land area, has 1,033.9 mi², about 1.8 times as much. Tennessee’s county land could hold about 71 areas the size of Williamson County.

Land area: Williamson County and the closest-sized states
Williamson County582.9 mi²
Rhode Island1,033.9 mi²

Another way to picture it: the same land area would fill a square about 24.1 miles (38.9 km) on each side. Real county shapes are rarely square, so this is a scale reference rather than a width or driving distance.

State figures are the sums of each state’s county-equivalent land measurements in the same Census release, so states and counties are compared on the same basis. Published state totals can differ slightly because of rounding. Compare all states · Counties bigger than entire states.

What stands out about Williamson County?

Williamson County has more land than 1,534 of the other 3,221 county equivalents in the dataset.

Land area compared with the typical county equivalent
Williamson County582.9 mi²
Tennessee median436.1 mi²
National median604.5 mi²

A median is the middle county-equivalent measurement, not the average of the largest and smallest. All three bars use the same linear scale. Very small areas may appear as a thin sliver; the labels retain their values.

Does including water change its rank?

Using land plus water places Williamson County at #1,808 nationally by total area, 120 places farther from the top than its land rank. Other county equivalents gain more area when their water measurements are included.

Its water share is 0.2%, compared with a national county-equivalent median of 1.2% — 1 percentage points lower. This describes the statistical geography’s land/water mix, not flood exposure or developable land.

Closest positions in the national land ranking

These entries sit immediately beside Williamson County in the national ranking. They can be in different states and are not necessarily geographic neighbors.

Land rankCounty equivalentLand mi²Comparison
#1687Upshur County, Texas583Compare
#1688Williamson County, Tennessee582.9This county
#1689Leake County, Mississippi582.9Compare

Calculated from the same Census release as the area table. Total-area order uses original ALAND + AWATER; water shares and chart labels use published square miles. Calculation details.

Representative coordinates

The Census internal point is 35.896134, -86.898987. It represents a location inside the geography; it is not necessarily the centroid or the address of a courthouse.

Source and precision

U.S. Census Bureau, 2026 Gazetteer Files, Counties. Original ALAND: 1,509,732,453 m²; AWATER: 3,011,571 m². Rankings use ALAND; exact ties use ascending GEOID. Tables preserve Census-published square miles to three decimals, with conversions based on those values.

Download the official county source ZIP ↗ · Methodology

Common questions

How big is Williamson County?

Williamson County, Tennessee has 582.9 square miles (1,509.7 km²) of land and 1.163 square miles of water, for a total area of 584.1 square miles. It ranks #1688 of 3,222 U.S. county equivalents by land area.

Is Williamson County the largest county in Tennessee?

No. Williamson County ranks #16 of 95 in Tennessee by land area. The largest is Shelby County, with 752.8 square miles of land.

What counties border Williamson County?

Williamson County shares a land border with Davidson County, Maury County, Rutherford County, Hickman County, Cheatham County, Dickson County, and Marshall County.

What is the population of Williamson County?

The Census Bureau estimates Williamson County had 272,061 residents on July 1, 2025, ranking #274 of 3,222 county equivalents. That is 467 people per square mile of land.

What is the county seat of Williamson County?

The county seat of Williamson County is Franklin.

What cities and towns are in Williamson County?

Williamson County has 8 incorporated places. The most populous five are Franklin city, Brentwood city, Spring Hill city, Nolensville town, and Fairview city; 60,676 residents live outside any incorporated place.

Is Williamson County part of a metropolitan area?

Yes. It is a central county of the Nashville-Davidson--Murfreesboro--Franklin, TN Metropolitan Statistical Area, which has 14 county equivalents and 2,197,416 residents.

How many ZIP codes are in Williamson County?

16 ZIP Code Tabulation Areas have land in Williamson County, and 9 of them have most of their land inside the county. Census ZIP Code Tabulation Areas approximate USPS ZIP Code areas.

How does Williamson County compare with U.S. states?

It has less land than every state. Rhode Island, the smallest, has 1.8 times as much land.

How many acres of land are in Williamson County?

The land measurement converts to approximately 373,063 acres. Including water, total area is approximately 373,807 acres. One square mile equals 640 acres.

Why might another source show a different area?

Check whether it reports land or total area, its Census vintage, and its rounding. Our guide explains how to reconcile county area figures.

Can this establish a property boundary?

No. Statistical measurements and generalized maps do not establish property lines. Consult the relevant local surveying or land-records authority.

Cite this county

Download the complete CSV or JSON dataset